The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 

Special offers

Products Map

Products Map

  • SA-8 Gecko SAM Battery (TSBX16)

    SA-8 Gecko SAM Battery (TSBX16) Includes two resin and metal SA-8 Gecko SAM vehicles and one Unit Card.
    TSBX16
    £17.10
    £19.00 save 10%
  • SA-9 Gaskin SAM Platoon (TSBX12)

    SA-9 Gaskin SAM Platoon (TSBX12) includes four Resin SA-9 Gaskin Anti-aircraft vehicles, one Decal sheet and two Unit cards.
    TSBX12
    £24.65
    £29.00 save 15%
  • Saga Book of Battles Supplement

    The Book of Battles is an unusual supplement. It is not a SAGA Universe, but a collection of scenarios and game variants that can be applied to any Universe in which you decide to play. It is therefore a perfect complement to the rulebook, a companion that enlarges its horizons by proposing alternatives to the basic Clash of Warlords scenario.
     
     
    The book is divided into five sections:
    Skirmishes • Battles • Legends • Mass Battles • Sagas
     
    SKIRMISHES
    The book’s first chapter is devoted to skirmishes, and offers only one scenario, Battle of Heroes,  BUT it offers a multitude of possible combinations (more than five thousand!), guaranteeing almost infinite re-playability.
    Skirmishes offer balanced games, and require no specific terrain pieces or particular rules not already included in Clash of Warlords. Thus, any group of players with access to the terrain pieces used in Clash of Warlords can play multiple variations of Battle of Heroes.
     
    BATTLES
    The second chapter is dedicated to battles. Before presenting the battle scenarios, this chapter offers a set of special rules specific to these scenarios, notably covering new terrain types, like buildings. Battles offer balanced encounters, but require specific terrain pieces, or the introduction of particular rules which can give an advantage to certain ways of assembling a warband. They are also noticeably more complex than Clash of Warlords and Battle of Heroes, but also offer very unusual situations for your Warlord to test himself against.
     
    LEGENDS
    The third chapter covers legends, narrative scenarios that tell an interesting story rather than providing a perfectly balanced struggle. It will suit players wishing to explore SAGA in a different, less competitive, and more narrative way. They sometimes place constraints on how warbands are  assembled, in order to save the story from the excesses of gamers! Thus, it is best to agree with your opponent in advance that you will play a legend during your session, so that each player can bring an appropriate warband. The chapter begins with a collection of special rules that will be used in these specific scenarios.
     
    MASS BATTLES
    The fourth chapter deals with games of three or four players. Its introduction describes the particular rules for this style of play, before presenting several scenarios designed to play SAGA with three or four players. Mass Battles are a unique chance to appreciate SAGA with every member of a gaming group, each one leading their own warband. The balance depends as much on the warbands involved as the relations between the players; some scenarios will win renown for the most diplomatic players, and others the most opportunistic!
     
    SAGAS
    The Book of Battles ends with a chapter for players who want to link their games and weave them into an overarching saga. Rather than detailing a traditional and constraining campaign system, the Sagas chapter offers a simple experience system, allowing your Warlord to increase his influence and develop new talents.
    BP1659
    £13.00
     
  • SAGA Undead Legion Warriors with Bows

    Supplied unpainted, unassembled and with a mixture of seperate and cast-on weapons. Includes Renedra plastic bases.

    Eight Miniatures
    SUD06
    £12.60
    £14.00 save 10%
  • Sand Golem

    Speedpaint is truly a one-coat painting solution. Simply apply one rich coat of Speedpaint directly over a primed miniature and you are done! The Speedpaint will leave that part of the model with both intense shading, vibrant colour, and a highlight effect in one application.
     
    It flows perfectly over your miniatures and creates an unparalleled painting solution to help you get more time for gaming.
    WP2020
    £3.50
     
  • Sandstone

    The TWO THIN COATS paint range features primary and secondary colours, as well as flesh tones, natural tones, metallic’s, and washes. All of the paints are designed around a triad system that consists of a shadow, a mid-tone, and a highlight, yet all can be used individually to create whatever result you desire.
     
    TWO THIN COATS paints will stand out due to their flow, how well they can be thinned (of course), the depth of their colour, and their most unique feature, how smooth they are when applying and particularly how smooth the finish is on the end result.
     
    15ml paint in dropper bottle with paint agitator (mixing ball). 
    10038
    £3.16
    £3.95 save 20%
  • Sanguine Highlight

    Sanguine Highlight - Formulated for the ultimate hobby experience Developed and used by the leading professionals in the hobby miniatures industry, Formula P3 paints, brushes, and hobby tools bring your miniatures to life. Privateer Press spent years designing the Formula P3 paint line. Here are a few reasons why it is the best miniature paint on the market. Great Colors: The key colors for WARMACHINE and HORDES come in base and highlight shades to make their application intuitive. Workable Drying Time: With an extended drying time, you can blend and mix paints without fear of wasting your paint or employing retardants or flow extenders. Wear Resistant: The formula dries to a hard and satin finish resistant to chipping. You won't fear handling your finished miniatures. Liquid Pigment: Unlike other paints, Formula P3 uses liquid pigments. It never separates when thinned and retains brightness after thinning and drying. Superior Coverage: Formula P3 often covers in a single coat - even over a black undercoat.

    PIP 93053
    £2.75
    £3.75 save 27%
  • Satin Black WarMag® Base Sheet

    What’s Included
    These are the magnet-receptive Base Sheets we’re truly known for. Each sheet is made from flexible rubber steel (ferrous), engineered to create secure, magnetic wargaming storage for your miniatures.
     
    Really Useful Box
    This sheet is precision-cut to fit the most popular Really Useful Box sizes used for miniature transportation: 4 Litre, 9 Litre XL and ‘Double Decker’ (UK / EU sizes).
     
    We’ve embraced the popularity of the Really Useful Box so your trusted plastic box becomes a magnetic, battle-ready Warhammer carry case without any faff.
     
    Anti-Scuff Coating
    Each WarMag Base Sheet is professionally printed and matt-laminated with a protective, anti-scuff coating. The result is a smooth, low-glare surface that not only looks sharp but helps prevent marks over time – keeping your miniatures steady and your wargaming storage looking smart, even with regular use.
     
    Self-Adhesive Installation
    There’s no cutting, gluing or measuring required. Simply peel off the backing, carefully place the sheet inside your Really Useful Box and press down for a clean, professional finish.
     
    Rounded Corners
    Unlike standard A4 sheets, we cut our Base Sheets with rounded corners for a neater, sleeker finish – offering that extra bit of style.
     
    Magnetised Minis
    Our Base Sheets pair perfectly with our self-adhesive magnets, creating a stable base for transporting and storing painted models. Whether you’re using magnets for Warhammer bases, Games Workshop armies or any other wargaming minis, these sheets keep your figures securely magnetized and tournament-ready.
     
    Sticky Labels Included
    Every Base Sheet comes with a set of matching sticky labels for quick box identification. Whether you’re sorting armies, game systems or faction types, these labels help you find what you need at a glance. No more lifting lids to guess what’s inside – just label it, stack it and go.
     
    Wargaming Themes
    From scorched battlefields to distant starfields, our printed Base Sheets cover a huge range of wargaming environments and battlefield themes. Whether you’re deploying across muddy trenches, frozen tundra, jungle ruins or lava-scorched wastelands, there’s a design to match your army’s aesthetic.
     
    Inspired by classic tabletop battlegrounds and sci-fi terrain, these designs evoke everything from grimdark cityscapes and arcane ruins to galactic conflict zones and alien worlds. Ideal for Warhammer 40K, Age of Sigmar, Horus Heresy, Star Wars Legion, Shatterpoint, Middle Earth Battle Strategy Game and other popular systems, they bring visual flair and lore-friendly immersion to your magnetic storage.
     
    With a wide palette of eerie greens, void blacks, ash greys and blood reds, you can coordinate your base sheet with your army, faction or skirmish board. It’s more than storage – it’s scenery with purpose.
     
    Tournament Ready
    Heading to a wargames event or local club night? This magnetic Base Sheet keeps your minis, models or figures steady on the move. Ideal for miniature transportation and even display, it’s a reliable upgrade for players who travel light – but pack heavy armies.
     
    Pair with round magnets, ovals or squares for Warhammer 40K, Age of Sigmar, Horus Heresy, Necromunda, Necrons, Kill Team and beyond.
     
    Made in the UK
    Designed and manufactured in our Devon-based workshop, WarMag Base Sheets are crafted by hobbyists, for hobbyists. Built to last, easy to use and a favourite for wargaming storage across multiple game systems.
     
    *Approximate Box Fit (UK / EU Sizes Only)
    4 Litre: Ext. 395×255×88mm / Int. 335×210×68mm
    4 Litre XL: Ext. 395×255×130mm / Int. 335×210×115mm
    4 Litre XXL: Ext. 395×255×170mm / Int. 335×210×155mm
    9 Litre: Ext. 395×255×155mm / Int. 335×210×140mm
    9 Litre XL: Ext. 395×255×205mm / Int. 335×210×180mm
    9 Litre XXL: Ext. 395×255×245mm / Int. 335×210×220mm
    9 Litre XL ‘Double Decker’: Ext. 395×255×205mm / Int. Bottom Layer: 335×210×105mm & Top Layer: 335×210×75mm
    9 Litre XXL ‘Double Decker’: Ext. 395×255×245mm / Int. Bottom Layer: 335×210×105mm & Top Layer: 335×210×115mm
    Note: These sheets are designed to fit UK / EU-sized Really Useful Boxes. The 4 Litre and 9 Litre boxes sold in the US are a different size, but the 9L XL size there is the same as it is in the UK. Very confusing, I know! But that’s not up to us, of course… Please send us an email ahead of your purchase if you’re not sure.
    TRADE-SFER-PVC-SZ1-BLK
    £4.95
     
  • Satyr Brown

    The TWO THIN COATS paint range features primary and secondary colours, as well as flesh tones, natural tones, metallic’s, and washes. All of the paints are designed around a triad system that consists of a shadow, a mid-tone, and a highlight, yet all can be used individually to create whatever result you desire.
     
    TWO THIN COATS paints will stand out due to their flow, how well they can be thinned (of course), the depth of their colour, and their most unique feature, how smooth they are when applying and particularly how smooth the finish is on the end result.
     
    15ml paint in dropper bottle with paint agitator (mixing ball). 
    10090
    £3.16
    £3.95 save 20%
  • Savage Core - Core Rulebook

    28mm pulp skirmish rules for battles beneath the surface of the Earth. A5 book pages - 5.8 x 8.3 (inches). 87 pages. full colour, tables, artwork and lore with charts and online support. For 2+ players, miniatures and dice not included. Savage Core is a fast play, competitive set of skirmish rules set in a primal land of savage warfare where clans battle for survival. Mature readers only, mature themes of primitive warfare.
    BP1705
    £12.00
     
  • Savage Core - The Age of Ice Deck Expansion

    For use with The Savage Core Rules Book.

    The Age of Ice Expansion Card Deck contains over 150 cards, from the main Savage Core game and the Age of Ice Expansion.

    Contains rules for every Age of Ice miniature, and every miniature from the original game.
    LI-AOIDECK
    £12.00
     
  • Saw Dust Scatter - Green Pasture

    The Sawdust scatter range is:
     
    Available in 15 colours to cover a range of effects
    A special Premium blend of dyed sawdust’s,
    Absorbs adhesives and glues
    Adheres to boards and surfaces with a long lasting and durable finish
    Colour fast, wont bleed colour and will retain original once adhesives have dried
    Easy to blend with other colours to give a more distinct and refined blend
    Due to the durable nature of the product is it ideal for Wargaming Boards, Train Layouts, Dioramas and other hobbies where frequent handling can be an issue
     
     
    Easy to use
     
    Luke’s Aps Sawdust scatter can be used for a multitude of different effects e.g. Placed directly on to a layout to create realistic ground cover, Browns can be used as peat or forest floor, Greens for lawns and meadows, and the appropriate shade of grey as pavements or gravel surfaces
     
    The scatter can also be applied as foliage to trees and basic shrubs to replicate leaves and foliage, for better effects please see our range of dedicated tree foliage.
     
    Also, great when applied over rocky outcrops to replicate scrubland.
     
    Contains approximately 40g
    GGS-SCATTER-GREENPASTURE
    £4.00
     
  • Saw Dust Scatter - Heather Mixture

    The Sawdust scatter range is:
     
    Available in 15 colours to cover a range of effects
    A special Premium blend of dyed sawdust’s,
    Absorbs adhesives and glues
    Adheres to boards and surfaces with a long lasting and durable finish
    Colour fast, wont bleed colour and will retain original once adhesives have dried
    Easy to blend with other colours to give a more distinct and refined blend
    Due to the durable nature of the product is it ideal for Wargaming Boards, Train Layouts, Dioramas and other hobbies where frequent handling can be an issue
     
     
    Easy to use
     
    Luke’s Aps Sawdust scatter can be used for a multitude of different effects e.g. Placed directly on to a layout to create realistic ground cover, Browns can be used as peat or forest floor, Greens for lawns and meadows, and the appropriate shade of grey as pavements or gravel surfaces
     
    The scatter can also be applied as foliage to trees and basic shrubs to replicate leaves and foliage, for better effects please see our range of dedicated tree foliage.
     
    Also, great when applied over rocky outcrops to replicate scrubland.
     
    Contains approximately 40g
    GGS-SCATTER-HEATHER
    £4.00
     
  • Saw Dust Scatter - Mid Green

    The Sawdust scatter range is:
     
    Available in 15 colours to cover a range of effects
    A special Premium blend of dyed sawdust’s,
    Absorbs adhesives and glues
    Adheres to boards and surfaces with a long lasting and durable finish
    Colour fast, wont bleed colour and will retain original once adhesives have dried
    Easy to blend with other colours to give a more distinct and refined blend
    Due to the durable nature of the product is it ideal for Wargaming Boards, Train Layouts, Dioramas and other hobbies where frequent handling can be an issue
     
     
    Easy to use
     
    Luke’s Aps Sawdust scatter can be used for a multitude of different effects e.g. Placed directly on to a layout to create realistic ground cover, Browns can be used as peat or forest floor, Greens for lawns and meadows, and the appropriate shade of grey as pavements or gravel surfaces
     
    The scatter can also be applied as foliage to trees and basic shrubs to replicate leaves and foliage, for better effects please see our range of dedicated tree foliage.
     
    Also, great when applied over rocky outcrops to replicate scrubland.
     
    Contains approximately 40g
    GGS-SCATTER-MIDGREEN
    £4.00
     
  • Saw Dust Scatter - Rough Pasture

    A special Premium blend of dyed sawdust’s,
    Absorbs adhesives and glues
    Adheres to boards and surfaces with a long lasting and durable finish
    Colour fast, wont bleed colour and will retain original once adhesives have dried
    Easy to blend with other colours to give a more distinct and refined blend
    Due to the durable nature of the product is it ideal for Wargaming Boards, Train Layouts, Dioramas and other hobbies where frequent handling can be an issue
     
     
    Easy to use
     
    Luke’s Aps Sawdust scatter can be used for a multitude of different effects e.g. Placed directly on to a layout to create realistic ground cover, Browns can be used as peat or forest floor, Greens for lawns and meadows, and the appropriate shade of grey as pavements or gravel surfaces
     
    The scatter can also be applied as foliage to trees and basic shrubs to replicate leaves and foliage, for better effects please see our range of dedicated tree foliage.
     
    Also, great when applied over rocky outcrops to replicate scrubland.
     
    Contains approximately 40g
    GGS-SCATTER-ROUGH
    £4.00
     
  • Saw Dust Scatter - Sand

    Add a touch of realism and detail to your scale modeling scenes, dioramas, and other creative projects with Saw Dust Scatter - Sand. This high-quality, sand-coloured sawdust scatter is perfect for creating the appearance of sandy beaches, desert dunes, and other arid environments. It is made from real sawdust that has been dyed and graded to ensure a consistent colour and particle size.
     
    Saw Dust Scatter - Sand can be used to create a variety of effects, such as:
     
    Sandy beaches for your coastal diorama
    Desert dunes for your North African-themed scale modeling scene
    Dry, sandy bases for your miniature figurines
    To use Saw Dust Scatter - Sand, simply apply it to your surface using a brush or your fingers. You can then secure it in place with a water-based adhesive. Once the adhesive has dried, you can paint the scatter or decorate it in any way you like.
     
    Example uses:
     
    Create sandy beaches for your coastal diorama by applying Saw Dust Scatter - Sand to your surface in a thin layer. Once the adhesive has dried, you can paint the scatter a darker shade of brown to add more realism.
    Add Saw Dust Scatter - Sand to your North African-themed scale modeling scene to create the appearance of desert dunes.
    Create dry, sandy bases for your miniature figurines that look like they are standing in a harsh, unforgiving environment. Simply apply a thin layer of Saw Dust Scatter - Sand to your base and secure it in place with adhesive. Once the adhesive has dried, you can paint the scatter a darker shade of brown to add more realism.
    Weight 40g / Volume 200ml
    GGSC-SD-250
    £3.99
     
  • Saw Dust Scatter - Tarmac Black

    The Sawdust scatter range is:
     
    Available in 15 colours to cover a range of effects
    A special Premium blend of dyed sawdust’s,
    Absorbs adhesives and glues
    Adheres to boards and surfaces with a long lasting and durable finish
    Colour fast, wont bleed colour and will retain original once adhesives have dried
    Easy to blend with other colours to give a more distinct and refined blend
    Due to the durable nature of the product is it ideal for Wargaming Boards, Train Layouts, Dioramas and other hobbies where frequent handling can be an issue
     
     
    Easy to use
     
    Luke’s Aps Sawdust scatter can be used for a multitude of different effects e.g. Placed directly on to a layout to create realistic ground cover, Browns can be used as peat or forest floor, Greens for lawns and meadows, and the appropriate shade of grey as pavements or gravel surfaces
     
    The scatter can also be applied as foliage to trees and basic shrubs to replicate leaves and foliage, for better effects please see our range of dedicated tree foliage.
     
    Also, great when applied over rocky outcrops to replicate scrubland.
     
    Contains approximately 40g
    GGS-SCATTER-TARMACBLACK
    £4.00
     
  • SBX45 T-60 Tank Company (x5)

    The Legkii Tank T-60 was a light tank developed to harass the flanks of the German army on the wide plains of Mother Russia. Its mobility and speed served the Soviets well.

    Flames Of War contents: this blister pack contains 1x Soviet T-60

    SBX45
    £29.70
    £33.00 save 10%
  • Scarlett Red Vallejo Game Air (17ml)

    Introduction

    Game Air is a range of water-based, matte acrylic colors, developed especially for airbrushing. The very latest formulation of this range uses new resins that have been selected for qualities which up till now could not be achieved in water based colors. The strength, resistance and covering power of Game Air is superior to any acrylic airbrush colour currently available.  Game Air is also ideal for application by brush to highlight the smallest detail on a miniature. The pigments have been selected according to their degree of light fastness and optimum micronisation. The effects of washes and transparencies can be obtained by diluting the colors and all the colours and varnishes can be mixed together and diluted with airbrush thinner.

    Game Air Colours

    The colours in the Game Air range have been selected to appeal to modelers and wargamers who use the existing Game Color range, so are ideal for all fantasy modelling. The names and shades of the most popular colors of Game Color have been retained in Game Air, but using the finer formulation and resins employed for Model Air (see Equivalency Table). In the color chart we include a diagram of the most frequent colour combinations: base color, light and shadow.

    Surfaces

    Game Air has exceptional performance on all materials. The adhesion of the colours on resin, plastic, steel and white metal is extraordinary. Moreover the surfaces do not require previous priming. Only in the case of a very dark base may it be useful to first apply a primer in order to increase the brightness of the final colors.

    How to Use

    Shake well before using. Pour the paint directly into the airbrush, either undiluted or previously diluted with Thinner (71.261). Colors can be mixed in the cup of the airbrush. Game Air dries almost instantly on the model and permits immediate application of aging processes as well as the use of washes, pigments, and dry-brush techniques.

    VAL72712
    £2.95
     
  • Scatter Woodland Fern Mid Green

    The Ultimate Base Layer for Realistic Scenery
     
    The Fine Flock from Geek Gaming Scenics is your go-to material for creating smooth, detailed, and realistic low-profile ground cover. With an ultra-fine particle size, it blends seamlessly with painted bases and serves as the perfect foundation for more elaborate scenic additions.
     
    Why Choose Fine Flock?
     
    Subtle & Seamless Texture: The small grain size creates a soft, consistent texture that convincingly represents short grass, moss, dirt, dry earth, and dense ground cover without overwhelming your miniatures.
     
    Perfect Base Layer: Use it to cover painted surfaces and fill in gaps between larger elements (like static grass or coarse flock), achieving a natural, multi-layered look.
     
    Maximum Colour Control (Available in a wide range of colours): Fine Flock is available in various realistic single colours and custom blends (like Light Green, Mid Green, Dark Green, Earth Tones, etc.). This allows you to precisely define different environments:
    Vibrant Fields (Bright Greens)
    Dry Wastelands (Brown/Tan Hues)
    Deep Forest Floors (Darker Blends)
     
    High Efficiency: The small particle size provides excellent coverage, making it highly efficient and cost-effective for flocking entire armies or large sections of a wargaming table.
     
    Easy to Use: Applies quickly with any hobby-grade PVA or scenic glue.
    Simple to Use for Maximum Impact:
     
    Apply your choice of adhesive (like the Geek Gaming Scenics Fast Drying Basing Glue) to the area you wish to cover.
    Generously press or sprinkle the Fine Flock onto the wet glue.
    Shake off the excess and allow to dry completely.
    Optionally, seal the flock with a scenic sealant for a rugged, permanent bond.
     
    Stop using flat colours—start building a truly realistic world!
    GGSC-WFMG-250
    £5.99
     
  • Scinari Enlightener

    Scinari Enlighteners are amongst the pre-eminent battlemages of Lumineth society. Renowned across the realms for their profound knowledge and thoughtful deliberation, these Scinari are experts in conjuring blinding light, searing beams, and banishing abjurations, and especially adept at turning the harm inflicted upon them back upon their enemies.
     
    This multipart plastic kit builds a Scinari Enlightener, a skilled master of mystical wisdom. This mage is posed floating above the ground, robes billowing behind them, with the burning Rune of Enthlai held in one hand. They wield a long, elegant crescent staff that can sear enemies with bolts of light, and have an Enlightener blade strapped to their back, ready to deliver a flurry of expert blows in combat. The kit includes a choice of two heads – one helmeted with an impressive crest, and a bare head with long braided hair and a delicate diadem.
     
    This kit comprises eight plastic components, and is supplied with a Citadel 32mm Round Base. This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.
    87-16
    £18.45
    £20.50 save 10%
  • Scorched Earth

    The TWO THIN COATS paint range features primary and secondary colours, as well as flesh tones, natural tones, metallic’s, and washes. All of the paints are designed around a triad system that consists of a shadow, a mid-tone, and a highlight, yet all can be used individually to create whatever result you desire.
     
    TWO THIN COATS paints will stand out due to their flow, how well they can be thinned (of course), the depth of their colour, and their most unique feature, how smooth they are when applying and particularly how smooth the finish is on the end result.
     
    15ml paint in dropper bottle with paint agitator (mixing ball). 
    10052
    £3.16
    £3.95 save 20%
  • Scrappers

    More than 150 years have passed since the apocalypse that nearly destroyed the Earth. Today, the planet is a torn remnant of its former glory, ravaged by nuclear fallout and mutagens. New lifeforms - Mutants and Synthetics - challenge True Humanity for dominance, while warring factions compete for survival and supremacy, and all must carve out their place in this brutal landscape, or else perish as billions before them. Scrappers is skirmish miniatures game set in the wastelands, where players assemble Scrapper Crews and send them out to scavenge scraps of Ancient technology and battle rival factions. Explorers, cultists and raiders clash with mutated creatures, robotic soldiers and embittered True Humans in this wargame of salvage and survival in the ruins of the future.

    BP1570
    £19.99
     
  • Scyrah Command Book

    Force of Retribution Soft Cover

    PIP 1086
    £16.95
    £24.95 save 32%
  • Sd Kfz 10/4 Light AA Platoon

    Sd Kfz 10/4 Light AA Platoon (x4)
     
    includes four resin and metal Sd Kfz 10/4 2cm Light AA tanks, one metal driver head sprue and one Unit card.
     
    The Sd Kfz 10/4 half-track's 20mm anti-aircraft gun protected German tanks and infantry. Their high-rate of fire put up a wall of lead that stopped anything from the Il-2 Sturmovik flying tank to a determined Soviet infantry assault.

    GBX111
    £26.10
    £29.00 save 10%
  • SD KFZ 251/16 Flammpanzerwagen Plastic Box Set

    A conversion of the SdKfz 251/1 AusfD with two flame projectors mounted on the sides designated 251/16. The 2 main flame projectors were backed up by the usual shield-mounted MG34 or MG42 and an additional portable (albeit still attached by pipe to the halftrack) smaller calibre flamethrower which could be used by dismounted infantry. The crew would don protective headgear from full hoods to havy scarves and goggles. Plenty of conversion opportunities here!

    This Warlord Games Box contains 1 plastic halftrack, leaflet and decal sheet

    402012006
    £22.50
    £25.00 save 10%
  • SD14 SAGA Age of Hannibal Punic/Carthaginian Dice

    Contains 8 SAGA Dice for use with:
     
    SAGA Age of Invasions Carthaginians
    SAGA Age of Invasions Sassanids
     
    SAGA Age of Hannibal Punic/Carthaginian
    SD14
    £12.00
    £14.00 save 14%
  • Sector Sept Ruins #2

    Sector Sept is a sci-fi terrain set designed for use with Warhammer 40,000, Infinity and much more!
     
    Dimensions: (Width: 220mm) (Depth: 110mm) (Height: 120mm)
     
    This quick and easy to assemble kit is made from 3mm mdf and is cut with precision to ensure minimal effort removing it from the sprue.
     
    This kit requires assembly. Models shown for scale and not included.
    TCF-SSR-002
    £6.95
     
  • Sector Sept Ruins #4

    Sector Sept is a sci-fi terrain set designed for use with Warhammer 40,000, Infinity and much more!
     
    Dimensions: (Width: 225mm) (Depth: 110mm) (Height: 155mm)
     
    This quick and easy to assemble kit is made from 3mm mdf and is cut with precision to ensure minimal effort removing it from the sprue.
     
    This kit requires assembly. Models shown for scale and not included.
    TCF-SSR-004
    £8.95
     
  • Self Adhesive Magnet Sheet A4

    Magnetic sheets have a variety of applications. They can be used for movement trays, to magnetise terrain, add magnetic properties to cases or on larger modelling projects.
     
    Each sheet is 210x297mm (A4 size) and has a pre-applied adhesive surface on one side. These sheets can be cut using scissors for smaller or obscure shapes.
     
    Once ready to use, remove the paper backing and press firmly onto a clean and dry surface. Leave for 60 minutes for best results.
     
    Contents:
     
    1x 210x297mm sheet. 0.75mm thickness.
    TCF-MSH-001
    £7.00
     
  • Sentient Turquoise

    The TWO THIN COATS paint range features primary and secondary colours, as well as flesh tones, natural tones, metallic’s, and washes. All of the paints are designed around a triad system that consists of a shadow, a mid-tone, and a highlight, yet all can be used individually to create whatever result you desire.
     
    TWO THIN COATS paints will stand out due to their flow, how well they can be thinned (of course), the depth of their colour, and their most unique feature, how smooth they are when applying and particularly how smooth the finish is on the end result.
     
    15ml paint in dropper bottle with paint agitator (mixing ball). 
    10067
    £3.16
    £3.95 save 20%
  • Sentinels of Order

    Chaos corrupts all, but it does not go unopposed. The forces of Order fight to reclaim what’s been taken, including the Allpoints, as the lands of the Varanspire were once known. Small forces are even now testing the defences of their infernal foes, infiltrating those blasted lands through stealth and guile. Every champion of the Ruinous Powers slain is a victory to be celebrated, every ancient relic liberated a gift for civilisation. Now it’s up to you – resist and reclaim!
     
    Sentinels of Order is the essential guide to commanding the forces of Grand Alliance: Order in games of Warcry. 12 warbands are detailed in full, from the noble Chambers of the Stormcast Eternals to mysterious aelves and sturdy duardin. You’ll find loads of new fighter cards, background tables, Fated Quests, and Challenge Battles – in short, everything you need to play the forces of Order in full campaigns.
     
    Inside, you’ll find:
     
    - Full rules for the following warbands: Cities of Sigmar, Daughters of Khaine, Idonenth Deepkin, Khainite Shadowstalkers, Kharadron Overlords, Lumineth Realm-lords, Fyreslayers, Seraphon, Sylvaneth, Stormcast Eternals Sacrosanct Chamber, Stormcast Eternals Warrior Chamber, and Stormcast Eternals Vanguard Auxiliary Chamber.
    - Fighter cards for nearly every model available to the Grand Alliance: Order ranges.
    - Rules for two Monsters of Order: War Hydra and Kharibdyss.
    - Refined rules to include Monsters in your warband, as well as new abilities to use against them!
    - New rules for warbands with mixed Faction Runemarks under the same Grand Alliance and more than one Leader.
    - Tables for warrior names, warband origins, and leader backgrounds.
    - 4 Order Fated Quests, including Spoils of Victory tables for both Honour and Glory.
    - 6 Order Challenge Battles, including special rules and valuable Spoils.
    - Blank roster sheets to copy and fill.
     
    If you yearn to take the fight to the eternal enemy of Order, this 112-page softback book is for you.
     
    A copy of the Warcry Core Book is required to make full use of the contents of this expansion.
    111-39
    £19.80
    £22.00 save 10%
  • Sentinels of Order Dice

    The skirmish battlefields of Warcry are a dangerous place, so what better way to channel the favour of the gods of Order than with a set of dice blessed by their omnipotence?
     
    These 16mm six-sided dice are presented in a bespoke flip top box.
     
    The dice set includes:
     
    - 6x opaque matt blue dice with white details
    - 6x opaque gold and white swirl effect dice with blue details
    and
    - 4x opaque white swirl effect dice with gold details, which can be used as Wild Dice
    111-76D
    £14.40
    £16.00 save 10%
  • Seraphon: Raptadon Hunters

    Raptadon Chargers are revered as holy paladins of Tepok, ruler of all things mystical – fanatical skinks riding quick-witted raptadon steeds, armed with arcane weapons taken from the depths of the Inscrutable One's temples. These relics glow with potent energies that can melt clean through armour, drawing on geomantic power to intensify each strike.
     
    This multipart plastic kit builds five Raptadon Chargers – skink mage-knights mounted atop swift hunting beasts. Every Charger wears a sacred headdress and wields a mystical Tepok lance – the skinks and their raptadon steeds each have distinctive, dynamic poses, and the kit also includes five moonstone clubs that can hang from belts or saddles. One model can be built as an Alpha champion with a unique head, one as a Hornblower musician, and one as an Icon Bearer carrying a feather-tasseled idol with a choice of two heads.
     
    This kit can alternatively build five Raptadon Hunters, cunning skink cavalry armed with javelins.
     
    This kit comprises 89 plastic components and comes with five Citadel 60x35mm Oval Bases. These miniatures are supplied unassembled and unpainted – we recommend using Citadel Plastic Glue and Citadel Colour paints.
    88-21
    £38.25
    £42.50 save 10%
  • Seraphon: Slann Starmaster

    Slann Starmasters are amongst the greatest wizards in all the realms, ancient beings created to serve the unfathomable Old Ones. It is their cold and distant intellect that guides the Seraphon to carry out the Great Plan, deciphered from glimpses of a grand cosmic equation. A Starmaster may reshape reality itself with a languid gesture, wielding the energies of the stars to annihilate the enemies of true order.
     
    This multipart plastic kit builds a Slann Starmaster – a toad-like mage-priest seated atop a floating palanquin. The Starmaster visibly exudes ancient wisdom and magical power, and the kit includes a huge variety of customisation options to make them your own. You'll find a choice of two heads – one with an open mouth, delicate necklace, and elaborate feathered crown, and one with a closed mouth, ornate talismans, and optional diadem. There's also two left arms – one carrying a sceptre, the other a crystal skull – and two right arms in different mystical poses, one of which comes with an optional arcane orb.
     
    Even the palanquin can be personalised – the kit offers a choice of carved upper panels, engraved frontpieces, and scenic base elements such as rubble and vines. Skink attendants can perch on either side of the Starmaster, one carrying a spear and shield, the other carrying your choice of Seraphon artefacts – each can also be replaced by a small lizard pet. It's a truly magnificent centrepiece to any Seraphon collection.
     
    This kit comprises 57 plastic components, and comes with a Citadel 80mm Round Base. This miniature is supplied unassembled and unpainted – we recommend using Citadel Plastic Glue and Citadel Colour paints.
    88-19
    £49.50
    £55.00 save 10%
  • Serberys Raiders/Sulphurhounds

    To be promoted from the Skitarii maniples to the Serberys corps is a great honour. They ride swift quadrupedal constructs whose razor-clawed limbs allow them to manoeuvre easily over the most shattered terrain, while their riders are mag-locked in gyro-stabilised positions. Serberys Raiders are long-range scouts and outriders. They excel at outflanking enemy forces and picking off unprotected assets. Advanced ocular arrays implanted into the riders’ skulls are noospherically linked with their mounts, ensuring maximum accuracy, while finely calibrated olfactory sensors and a suite of sensitive augury equipment make them dogged and feared trackers.
     
    Serberys Raiders are well equipped for combat at every distance, with galvanic carbines offering ranged punch and finely crafted cavalry sabres for melee combat. The squad’s alpha is also armed with a hard-hitting archeo-revolver. They make for a versatile vanguard unit, able to ride ahead of their fellow Skitarii and even snipe at enemy command assets.
     
    This kit can alternatively be used to build a unit of Serberys Sulphurhounds instead, meaning that regardless of which unit you assemble, you'll end up with plenty of spare components for customising your collection.
     
    This kit is supplied in 103 plastic components with which to assemble three models, each supplied with a Citadel 60mm x 35mm Oval Bases. Also included is an Adeptus Mechanicus transfer sheet.
    59-24
    £36.00
    £40.00 save 10%
  • Sergeants at Arms (Mounted)

    This box set contains twelve 28mm multi-part plastic Sergeants at Arms with a mixture of barded and unbarded horses. You can build several types of Sergeants with a choice of many weapons among which you'll find crossbows for assembling Mounted Crossbowmen units. Figures are 28mm sized, supplied unpainted and require some assembly.
     
    The box contains enough plastic bases for Deus Vult gaming system:
     
    50mm x 50mm = 3 bases
    25mm x 50mm = 6 bases
    FF007
    £24.00
     
  • Shadowblade Dark Elf Assassin

    Far beyond even the most skilled human killer, the Shadowblades are true masters of murder. It is said they can change their faces, appearing as any of the myriad mortal races of the realms. Moving through cities while hidden in plain sight, their prey seldom see them coming until it is far too late.
     
    This plastic kit contains 7 components with which to make one Assassin armed with poison-coated blades.
     
    This kit comes supplied unpainted and requires assembly - we recommend using Citadel Plastic Glue and Citadel Paints. 
    99070212003
    £18.00
     
  • Shamrock Green

    Speedpaint is truly a one-coat painting solution. Simply apply one rich coat of Speedpaint directly over a primed miniature and you are done! The Speedpaint will leave that part of the model with both intense shading, vibrant colour, and a highlight effect in one application.
     
    It flows perfectly over your miniatures and creates an unparalleled painting solution to help you get more time for gaming.
    WP2041
    £3.50
     
  • Shardspeaker of Slaanesh

    Shardspeakers of Slaanesh are favoured sorcerers who have been gifted with a relic from the Temple of Twisted Mirrors. By tapping into the power of these artefacts, they can reduce a disciplined regiment to a pack of howling beasts ripe for slaughter. 
     
    These wizards wield powerful malus-inflicting relics, and lurk behind your main lines to support your melee units with debilitating spells. Though lightly armed and armoured, they're surrounded by malefic spirits that come to their aid, both for their protection and to destroy any foe foolish enough to get too close. 
     
    The kit is comprised of 7 plastic components, with which you can assemble one single-pose Shardspeaker of Slaanesh, and is supplied with a Citadel 32mm Round Base.
    83-88
    £16.40
    £20.50 save 20%
  • Shattered Dominion 25mm & 32mm Round Bases

    40 25mm Round bases and 30 32mm Round bases, with 16 extra skulls for decoration – these moulded bases will help you achieve a stunning look for your miniatures!
    66-96
    £20.25
    £26.00 save 22%
  • Shattered Dominion 40mm & 65mm Round Bases

    20 40mm Round bases and 6 65mm Round bases, with 8 pieces of rubble to add as you please – these moulded bases will help you achieve a stunning look for your miniatures!
    66-97
    £20.25
    £26.00 save 22%
  • Shattered Dominion 60mm & 90mm Oval Bases

    6 90x53mm Oval bases and 20 60x35mm Oval bases, with 14 pieces of rubble to add as you please – these moulded bases will help you achieve a stunning look for your miniatures!
    66-98
    £20.25
    £26.00 save 22%
  • Shattered Dominion Large Base Detail Set

    Shattered Dominion Large Base Detail Set contains 54 large pieces of rubble and 10 large mushroom and stalagmite bits – your Warhammer Age of Sigmar armies are going to look amazing.
    66-99
    £20.25
    £26.00 save 22%
  • Shipping Containers - 40FT (1) & Pallets (8)

    1/56 Scale 1x 40ft Shipping Container & 8 x Pallets
     
    comes as Kit form, Unassembled and Unpainted
     
    The kit consists of 4 frames ; Back & Doors , 2 x Side wall & Top or bottom , 1 Frame  8 x pallets
     
    REN-SHIP40
    £10.00
     
  • Sick Green Vallejo Game Air (17ml)

    Introduction

    Game Air is a range of water-based, matte acrylic colors, developed especially for airbrushing. The very latest formulation of this range uses new resins that have been selected for qualities which up till now could not be achieved in water based colors. The strength, resistance and covering power of Game Air is superior to any acrylic airbrush colour currently available.  Game Air is also ideal for application by brush to highlight the smallest detail on a miniature. The pigments have been selected according to their degree of light fastness and optimum micronisation. The effects of washes and transparencies can be obtained by diluting the colors and all the colours and varnishes can be mixed together and diluted with airbrush thinner.

    Game Air Colours

    The colours in the Game Air range have been selected to appeal to modelers and wargamers who use the existing Game Color range, so are ideal for all fantasy modelling. The names and shades of the most popular colors of Game Color have been retained in Game Air, but using the finer formulation and resins employed for Model Air (see Equivalency Table). In the color chart we include a diagram of the most frequent colour combinations: base color, light and shadow.

    Surfaces

    Game Air has exceptional performance on all materials. The adhesion of the colours on resin, plastic, steel and white metal is extraordinary. Moreover the surfaces do not require previous priming. Only in the case of a very dark base may it be useful to first apply a primer in order to increase the brightness of the final colors.

    How to Use

    Shake well before using. Pour the paint directly into the airbrush, either undiluted or previously diluted with Thinner (71.261). Colors can be mixed in the cup of the airbrush. Game Air dries almost instantly on the model and permits immediate application of aging processes as well as the use of washes, pigments, and dry-brush techniques.

    VAL72729
    £2.95
     
  • Sign A (Mr Sparkle)

    Sign A is made from 3mm acrylic, easy to put together and looks great on the tabletop. Great scenery to use with 40K and Infinity. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

    SFU020
    £2.45
    £4.95 save 51%
  • Sign B (Relative Storage)

    Sign B is made from 3mm acrylic, easy to put together and looks great on the tabletop. Great scenery to use with 40K and Infinity. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

    SFU021
    £3.74
    £4.95 save 24%
  • Sign C (Leeroys Whelp Wings)

    Sign C is made from 3mm acrylic, easy to put together and looks great on the tabletop. Great scenery to use with 40K and Infinity. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.
     
    Compatible with Sci Fi Scenics Large Wall and Sign Attachments.
    SFU022
    £3.74
    £4.95 save 24%
  • SIGN F - AVATAR SHIPPING CO

    Sign f is made from 3mm acrylic, easy to put together and looks great on the tabletop. Great scenery to use with 40K and Infinity. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.
     
    Compatible with Sci Fi Scenics Large Wall and Sign Attachments.
    SFU025
    £3.74
    £4.95 save 24%