| The Colour Forge Steelforge Silver spray offers exceptional coverage and quality without the price tag. Using a tried and tested formula this product is on par with the best in the industry. Presented in a 500ml rattle can (25% more than other brands on the market!). This spray is colour matched to GW Leadbelcher. For the best results: 1. Shake the can thoroughly for 5 minutes. 2. Pour warm water over the body of the can to bring it up to room temperature. 3. Repeat until all paint is warmed through. 4. Hold spray 12 inches from model and use short passes over the uncovered areas until the model is covered. 5. After use, rotate the can so it is upside down and spray until clear, this reduced the chance of nozzle blockages. |
| The Colour Forge Sunset Yellow spray offers exceptional coverage and quality without the price tag. Using a tried and tested formula this product is on par with the best in the industry. Presented in a 500ml rattle can (25% more than other brands on the market!). This spray is colour matched to GW Averland Sunset. For the best results: 1. Shake the can thoroughly for 5 minutes. 2. Pour warm water over the body of the can to bring it up to room temperature. 3. Repeat until all paint is warmed through. 4. Hold spray 12 inches from model and use short passes over the uncovered areas until the model is covered. 5. After use, rotate the can so it is upside down and spray until clear, this reduced the chance of nozzle blockages. |
| Super Glue or Cyanoacrylate is an essential for any hobby lover! Perfect for Plastic, Metal or Resin! Contains 20g of Super Glue in a screw-top bottle. |
| The Colour Forge Tempest Blue spray offers exceptional coverage and quality without the price tag. Using a tried and tested formula this product is on par with the best in the industry. Presented in a 500ml rattle can (25% more than other brands on the market!). This spray is colour matched to GW Kantor Blue. For the best results: 1. Shake the can thoroughly for 5 minutes. 2. Pour warm water over the body of the can to bring it up to room temperature. 3. Repeat until all paint is warmed through. 4. Hold spray 12 inches from model and use short passes over the uncovered areas until the model is covered. 5. After use, rotate the can so it is upside down and spray until clear, this reduced the chance of nozzle blockages. |
| The Colour Forge Trench Brown spray offers exceptional coverage and quality without the price tag. Using a tried and tested formula this product is on par with the best in the industry. Presented in a 500ml rattle can (25% more than other brands on the market!). This spray is colour matched to Games Workshop’s Steel Legion Drab. For the best results: 1. Shake the can thoroughly for 5 minutes. 2. Pour warm water over the body of the can to bring it up to room temperature. 3. Repeat until all paint is warmed through. 4. Hold spray 12 inches from model and use short passes over the uncovered areas until the model is covered. 5. After use, rotate the can so it is upside down and spray until clear, this reduced the chance of nozzle blockages. |
| The Colour Forge Wolfkin Grey spray offers exceptional coverage and quality without the price tag. Using a tried and tested formula this product is on par with the best in the industry. Presented in a 500ml rattle can (25% more than other brands on the market!). This spray is colour matched to GW The Fang. For the best results: 1. Shake the can thoroughly for 5 minutes. 2. Pour warm water over the body of the can to bring it up to room temperature. 3. Repeat until all paint is warmed through. 4. Hold spray 12 inches from model and use short passes over the uncovered areas until the model is covered. 5. After use, rotate the can so it is upside down and spray until clear, this reduced the chance of nozzle blockages. |
| Across the galaxy, small forces are sent out to secure vital objectives, scout ahead of the main force, and confront enemies. These Combat Patrols are key to victory, taking on small but important missions. This book will immerse you in the grim, dark and fascinating world of Warhammer 40,000. It explores the easiest way to delve into the Warhammer hobby – Combat Patrol – and the fun you can have conquering tabletop battlefields. It will also be your invaluable guide to a galaxy driven by endless war. The Combat Patrol Companion will introduce you to the Warhammer 40,000 hobby, providing you with inspiration and guidance as you collect stunning miniatures, build and paint them, and then play games with them against your friends. If you just purchased your first Combat Patrol or are considering doing so, this is the book for you. This 184-page softcover book contains: – What is Combat Patrol?: A brief overview of this skirmish battle system. – The Hobby: Guidance on how to get your warriors from their box to the tabletop. – Playing Combat Patrol: Missions, getting ready for battle, playing the battle, what happens after the battle, and advice for expanding your collection beyond the box. – A Galaxy at War: Background of important locations in the galaxy, including details of seven contested war zones. – The Factions: An overview of all the factions of the Imperium, Chaos, and Xenos. |
| Aeldari Corsairs have cast aside the restraints of the Asuryani paths in favour of a life of adventure and glory. Known as the Anhrathe, they travel wherever they choose. Using their superior technology, grace, and prowess in battle, they raid the fleets of lesser beings, attack planetary targets in search of treasures, or simply destroy the forces of their sworn enemies. The Stars Are Yours To Take! This loaded box is the perfect way to start a new Corsairs-themed Aeldari collection – or expand an existing army – and save money compared to buying the kits individually. The force is led by Kharseth, a powerful Void Dreamer psyker. Corsair Skyreavers use their winged jump packs to operate as elite shock troops, striking where they'll do the most damage. A unit of Corsair Voidreavers forms the core of the force, applying lethal firepower with precision and holding vital objectives. A Wave Serpent gets them where they need to go and supports them with heavy firepower. These miniatures represent a complete Aeldari force for use in tight, tactical Combat Patrol games of Warhammer 40,000. The rules for this Combat Patrol are available as a free download on the Warhammer Community website. This boxed set is only available while stocks last. This boxed set builds 17 multipart plastic Aeldari miniatures: – 1 Kharseth – 1 Wave Serpent (which can alternatively be built as a Falcon) – 5 Corsair Skyreavers – 10 Corsair Voidreavers (which can alternatively be built as Corsair Voidscarred) The miniatures in this box are easy to customise. The Wave Serpent can be armed with twin shuriken catapults or a shuriken cannon, and a twin shuriken cannon, twin missile launcher, twin bright lance, twin scatter laser, or twin starcannon. It can alternatively be built as a Falcon – a tank that sacrifices some transport capacity for even more heavy weapons. One of the Corsair Skyreavers can be built as an optional champion, armed with a shuriken pistol, blast pistol, neuro disruptor, or raiding hook in one hand, and a sword or chainsword in the other. Up to two miniatures can be armed with optional ranged weapons – a shredder, blaster, fusion gun, or flamer. There are also 15 interchangeable heads and 5 interchangeable winged backpacks. Each of the Corsair Voidreavers can be armed with shuriken pistols and power swords or shuriken rifles. The unit leader has the additional options of a neuro disruptor or shuriken rifle and a choice of two heads. One Voidreaver can optionally be armed with a blaster, one with a shredder, and one with a shuriken cannon or wraithcannon. The kit comes with 18 interchangeable heads, and 9 interchangeable back vanes. The Voidreavers can alternatively be built as veteran Voidscarred. This kit is supplied with 1 Aeldari Craftworlds Transfer Sheet, containing 378 high-quality waterslide transfers. These include symbols for the Alaitoc, Biel-Tan, Iyanden, Saim-Hann, and Ulthwé Craftworlds, along with Aspect Runes and other markings to decorate your miniatures. This kit comprises 317 plastic components, 1 Citadel 32mm Round Base, 15 Citadel 28.5mm Round Bases, 1 Citadel Large Flying Base, and 2 Citadel Small Flying Stems. These miniatures require assembly and are supplied unpainted |
| Genestealer Cults armies outmanoeuvre their foes with infiltration, clawed horrors and grimy militia alike, squirming through sewers and pipe networks to reach their prey. They prepare ambush sites and kill zones, flotillas of repurposed vehicles and dirtcycles roaring from obscured flanks to crush their reeling enemies. Praise the Four-armed Emperor with Combat Patrol: Genestealer Cults. This loaded box includes a blisteringly fast force, led by a swift and deadly Jackal Alphus, riding at the head of a group of Atalan Jackals. The armour and firepower of an Achilles Ridgerunner drives up in support, whilst a unit of thrashing Hybrid Metamorphs scuttles forward with preternatural speed. This box also allows you to save money compared to buying each kit individually, making it an excellent way to start your army or expand an existing collection. These miniatures can also be used as a complete Genestealer Cult army for use in Combat Patrol games of Warhammer 40,000 – the rules for this Combat Patrol are available as a free download on the Warhammer Community website. This set includes the following 17 multipart plastic models: – 1x Jackal Alphus – 1x Achilles Ridgerunner – 5x Atalan Jackals – 10x Hybrid Metamorphs (which can alternatively be built as Acolyte Hybrids) All models come with their appropriate bases. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints. |
| Imperial Agents form the front lines of Humanity’s struggle for survival against corruption—be it far away at the fringes of the Imperium's clawing influence or right in the midst of its choked and desperate heart. Devout specialists, uncompromising operatives, and zealous practitioners of the Imperial creed must all come together in this endless war, one where faith and zealotry are weapons as potent as any blade or firearm. Hunt down and persecute heretics and traitors to the God-Emperor’s realm with absolute focus and lethal precision with this superb Combat Patrol. Led into battle by the zealous cries of a Ministorum Priest, a terrifying Eversor Assassin stalks their prey, whilst two brutal Vigilant Squads of Adeptus Arbites mete out decreed judgement, their actions watched closely by a shadowy unit of dedicated Inquisitorial Agents. This box allows you to save money compared to buying each kit individually, making it an excellent way to start your army or expand an existing collection. These miniatures can also be used as a complete Imperial Agents force for use in Combat Patrol games of Warhammer 40,000 – the rules for this Combat Patrol are available as a free download on the Warhammer Community website. This set includes the following multipart plastic models: – 1x Ministorum Priest with Vindictor – 1x Eversor Assassin – 6x Inquisitorial Agents, with 1x Tome-skull – 20x Vigilant Squad, with 2x Cyber-mastiffs, and 2x Nuncio-aquilas This set also includes 2x Adeptus Arbites Transfer Sheets, each containing 297x high-quality waterslide transfers for you to add even more individual flavour to your miniatures. This set comprises 492 plastic components, and is supplied with 1x Citadel 32mm Round Slotta Base, 20x Citadel 28.5mm Round Bases, 2x Citadel 32mm Round Bases, and 10x Citadel 25mm Round Bases. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints. |
| The Night Lords Legion fights in small warbands across the galaxy, using terror tactics to frighten their prey into submission before blades are even drawn. They are cruel and merciless, dispatching their victims in horrific displays of gore to chill the blood of their foes and cause them to break and rout. Unleash the Terror! This packed box is the perfect way to start a new Night Lords-themed Chaos Space Marines collection – or expand an existing army – and save money compared to buying the kits individually. This army is led from the front by a Chaos Lord with Jump Pack, a melee powerhouse eager to get stuck in. The core of the force is composed of Legionaries, versatile line troops just as capable of taking vital objectives as unleashing devastating firepower. A unit of Chosen brings thousands of years of experience to the fight, along with powerful melee weapons. The Chaos Rhino will get one of your units where they need to go in relative safety, making this force surprisingly mobile. These 17 multipart plastic miniatures represent a complete Chaos Space Marines force for use in tight, tactical Combat Patrol games of Warhammer 40,000. The rules for this Combat Patrol are available as a free download on the Warhammer Community website. This boxed set is only available while stocks last. This boxed set builds 17 multipart plastic Chaos Space Marines miniatures: – 1x Chaos Lord with Jump Pack – 1x Chaos Rhino – 5x Chosen – 10x Legionaries The miniatures in this box are easy to customise. The Chaos Lord with Jump Pack can be armed with a bolt pistol or a plasma pistol, and a power fist, a power axe, or a pair of lightning claws. They have a choice of two heads – helmeted or bare. The Chaos Rhino comes with a variety of optional Chaos icons, trophy racks, chains, hooks, dozer spikes, corrupted armour plates, and a havoc launcher. Its combi-bolter can be upgraded to a combi-weapon, and there is an option for a gunner, driver, or closed hatch. The Chosen Champion can be armed with a chainsword, power axe, or power maul, and has a choice of two chest plates, two tabards, three heads, and three backpack toppers. The rest of the squad can be armed with interchangeable weaponry, including two bolters, two bolt pistols, two plasma pistols, two combi-weapons, two chainswords, two chainaxes, a power fist, and a pair of lightning claws. They also have four interchangeable backpacks, eight shoulder pads, and 12 heads. The Aspiring Champion of the Legionaries can be armed with a plasma pistol or a bolt pistol, and a power fist, chainsword, power maul, or power axe. The rest of the squad can be armed with interchangeable weaponry, including eight bolters, eight bolt pistols, nine chainswords, a meltagun, a plasma gun, a flamer, a missile launcher, a heavy bolter, a poisoned blade, a chainglaive, lightning claws, and a twisted banner. They also have 13 interchangeable heads and 12 shoulder pads. The Legionaries kit also includes an upgrade frame, which includes heads and shoulder pads that can be used with the Legionaries, Chaos Lord with Jump Pack, and Chaos Chosen to give them more Night Lords character. This box also includes 1 Chaos Space Marine Transfer Sheet, featuring 364 high-quality waterslide transfers. These include symbols for the Black Legion, Alpha Legion, Thousand Sons, Iron Warriors, Word Bearers, and Night Lords, along with other cursed sigils for you to decorate your miniatures. This kit comprises 438 plastic components, 1 Citadel 40mm Round Base, and 15 Citadel 32mm Round Bases. These miniatures require assembly and are supplied unpainted – we recommend using Citadel Plastic Glue and Citadel Colour paints. |
| The Red Corsairs strike out in small bands of cruel warriors, raiding and pillaging where and when they want. They survive off scavenged assets from their conquered foes, constantly seeking to grow and take on larger prey. The Heretic Astartes often employ mortal cultists and beastmen to swell their numbers and take care of weaker enemies. Take What's Yours! This packed box is the perfect way to start a new Red Corsairs-themed Chaos Space Marines collection – or expand an existing army – and save money compared to buying the kits individually. This hard-hitting force is led by a Red Corsairs Reave-captain, a brutal and cruel warlord equipped for close combat. The core of the force is composed of power-armoured Red Corsairs Raiders and a unit of savage Fellgor Ravagers. A Chaos Rhino supports the force, getting your units where they need to go in relative safety. These miniatures represent a complete Chaos Space Marines force for use in tight, tactical Combat Patrol games of Warhammer 40,000. The rules for this Combat Patrol are available as a free download on the Warhammer Community website. This boxed set is only available while stocks last. This boxed set builds 17 multipart plastic Chaos Space Marines miniatures: – 1 Red Corsairs Reave-captain – 1 Chaos Rhino – 5 Red Corsairs Raiders – 10 Fellgor Ravagers The miniatures in this box are easy to customise. The Red Corsairs Reave-captain can be equipped with either a power maul or a power sword, and a plasma pistol or a plundered trophy. He has a choice of 3 heads, 2 bandoliers, and 2 backpack toppers. The Chaos Rhino comes with a variety of optional Chaos icons, trophy racks, chains, hooks, dozer spikes, corrupted armour plates, and a havoc launcher. Its combi-bolter can be upgraded to a combi-weapon, and there is an option for a gunner, driver, or closed hatch. One of the Red Corsairs Raiders can be built as an optional champion. The kit includes 14 interchangeable heads, 16 interchangeable shoulder pads, and different weapons, including boltguns, bolt pistols, and vicious reaver’s blades. One of the Fellgor Ravagers can be built as an optional champion, another can optionally take a great weapon, and another can take an optional corrupted stave. There are other cosmetic options, including a whip, corrupted claws, and a hurled grenade, along with 15 interchangeable horns and 15 interchangeable heads. This box also includes 1 Red Corsairs Transfer Sheet, featuring 248 high-quality waterslide transfers. These include a selection of infantry and vehicle-sized transfers depicting Red Corsairs iconography, skulls, kill tallies, and other cursed sigils. This kit comprises 368 plastic components, 1 Citadel 40mm Round Base, and 15 Citadel 32mm Round Bases. These miniatures require assembly and are supplied unpainted – we recommend using Citadel Plastic Glue and Citadel Colour paints. |
| These compact paint racks are a must have for any hobbyist. Designed to sit comfortably on desks of any size they are perfect for keeping your workspace clean and tidy without encroaching on space! This rack holds up to 21 Citadel paint pots and boasts a 2 side or front mounted brush holders with a capacity for 5 brushes of various common sizes. These holders double up as adapters to allow a joining of multiple racks. This rack measures 280mm wide, 110mm deep and 125mm high. This product is cut from 3mm MDF and requires assembly. Brushes and paints sold separately and shown for illustrative purposes. |
| 3 Mounted Confederate Generals Perry Miniatures suitable for any 28mm game set in the American Civil War |
| The Contemptor Dreadnought is a fusion of traditional technologies and arcane cybernetic lore, its impressive speed and strength fuelled by the powerful atomantic reactor that also supplies the defensive energy fields which further increase its durability. Though the Contemptor can be armed for a variety of battlefield roles, many Legion commanders prefer to specialise the walker's arsenal – equipping it with a pair of devastating heavy weapons particularly suited to eliminating enemy tanks, chewing through elite infantry, or shredding lightly-armoured foes. This plastic upgrade kit provides an extra set of ranged weapons for your Contemptor Dreadnought, allowing you to specialise its loadout with a pair of identical arm-mounted ranged weapons. The kit includes the components to build four different heavy weapons – a conversion beam cannon, Gravis plasma cannon, Kheres assault cannon, and volkite dual-culverin – each of which can be mounted on either of your Contemptor's arms. It also contains an additional right-handed melee fist, which can be built as either a Gravis power fist or Gravis chain fist, and sports your choice of in-built weapon – a combi-bolter, graviton gun, heavy flamer, meltagun, or plasma blaster. The kit also provides a number of extra components – a helical targeting array, a spare chainfist blade, three chest plates, an alternate head, a choice of power fist digits, and accessories representing scrollwork or decorative shields. This upgrade kit comprises 57 plastic components and is designed to be assembled with the Contemptor Dreadnought set, which is sold separately. These components are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel paints. |
| Enhance your WARMACHINE experience with this set of three beautifully-sculpted Convergence of Cyriss Light and Heavy Vector Wreck Markers. Specifically designed to deliver a stunning visual impact without limiting game play, the Heavy Vector Wreck Marker and two Light Vector Wreck Markers gorgeously represent the carnage of battle and lift easily off of their seating rings so that other models can move over the wrecks without risk of damage or distorting play.
Product Information Base Size: 40mm, 50mm PIP Code: 91069 Model Materials: Resin and White Metal Model Count: 3 Packaging: Box |
| Starsteles were placed upon worlds as territorial markers and silent guardians by jealous Necron nobles. Over the millennia they have become forgotten archaeological curios or feared sources of superstitious rumour about vanishments and strange lights. Now they awaken again as their masters do. This faction-specific Fortification not only provides covers for your Necron forces as they advance, but it also grants multiple benefits to nearby units. Each of the three Starsteles that make up the Convergence of Dominion is armed with a transdimensional abductor, an ancient weapon perfect for killing any enemies that would dare get too close. This 14 part plastic kit builds three Starsteles, which make up a Convergence of Dominion. |
| This natural material can be easily cut and engraved with precise details and easily glued to make the perfect base for your figures. Cork is a material that has been used in various applications since ancient times. But with a little bit of imagination, it can also be used in a multitude of ways and its one of the the most amazing natural materials one can find, cork is perfect for making scenic elements for wargame tables, railway layouts or for bases of figures and dioramas. Cork comes in a variety of colours and styles, and it can be worked easily into any desired shape!-Used to make scenic elements for wargame tables, railway layouts or dioramas Cork is a natural, permeable material and is ideal for a great number of different purposes in the hobby world. It is conductive, very durable and gives a realistic finish. It is easily glued down with PVA glue. Our Fast Drying Basing Glue Adhesive is highly recommended for application Easy to Apply Create a detailed and realistic finish for your models or gaming tables Contains approximately 210ml Please note - Although we take high resolution pictures and keep the images as raw as possible, colours may vary slightly as different settings in computers and monitors make it difficult to show the exact colours. |
| High grade 2mm thick cork sheet. Ideal for basing, dioramas and more! Each sheet measures 210mm x 297mm. 1 sheet supplied. |
| With ancient wisdom, the Cornflower (Centaurea cyanus), once used to heal Chiron, the wise centaur, spreads its small blue flowers across farmland grain fields, offering joy, beauty, and safety. A delicate symbol of hope and resilience. This sheet contains around 370 different shaped and sized tufts for your scale models, hobby figures and scenic dioramas. We recommend using a pair of tweezers for more control to peel the tufts off the sheet. For a more tough and permanent fix, you can use a little PVA glue. |
| Looming ghost warriors many times larger than even the mighty Wraithlords, the war machines known as Wraithknights are still dextrous enough to run through the ruin of a shattered city, leaping from pillar to spar as their arcane weapons bring oblivion to the enemies of the Aeldari. Dominating the tabletop, the Wraightknight is an enormous model, standing almost 9” tall at its highest point at the top of the Warp vanes. There are a variety of different armaments available to this kit. Its left arm can be equipped with either a wraithcannon or a scattershield. The right arm has a choice of wraithcannon, ghostglaive or suncannon. There are two of each of the following secondary weapons: shuriken cannon, a scatter laser and a starcannon, These are shoulder mounted and can be taken in any combination. As if that wasn't enough, there are a variety of closed and open fists, allowing you even more options for customisation. This multi-part plastic kit contains 114 components with which to make one Aeldari Wraithknight. This kit comes supplied unpainted and requires assembly - we recommend using Citadel Plastic Glue and Citadel Paints. |
| The TWO THIN COATS paint range features primary and secondary colours, as well as flesh tones, natural tones, metallic’s, and washes. All of the paints are designed around a triad system that consists of a shadow, a mid-tone, and a highlight, yet all can be used individually to create whatever result you desire. TWO THIN COATS paints will stand out due to their flow, how well they can be thinned (of course), the depth of their colour, and their most unique feature, how smooth they are when applying and particularly how smooth the finish is on the end result. 15ml paint in dropper bottle with paint agitator (mixing ball). |
| The Craventhrone Guard serve Kurdoss Valentian and any who share his aims. Bitter and spiteful even compared to other Nighthaunt, these spectral sharpshooters relish lining up enemy champions in their sights, sending them to an early grave without fanfare or mercy. Though they enforced Valentian's will in life, the Craventhrone Guard are now are cursed to torment him, shooting down his prey before he can truly claim the glory of the kill. This multipart plastic kit builds five Craventhrone Guard, wielding soulhunter crossbows to unleash a hail of deadly bolts at close range, with the option to assemble one as a Craven Huntmaster and one as a Spectral Standard Bearer. Each model has a choice of hooded and helmeted heads, with other components such as decrepit quivers to add variety and keep your units looking unique. This kit comprises 53 plastic components, and is supplied with 5x Citadel 32mm Round Bases. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel paints. |
| In an exception to the convention of the time of the Crimean War that a British infantry regiment would consist of only a single battalion, the Foot Guards each paraded more than one; the Grenadier Guards had three, the Coldstream Guards two, and the Scots Fusilier Guards two. Inkerman is an iconic battle for the Foot Guards as they held an isolated position unsupported against overwhelming odds. The Grenadiers were the only regiment to take their colours into the battle and as a result they became a focal point for the battalion, giving it not only a place to rally, but also a place to defend, as the men did not want to lose the colours of Queen Victoria’s premier Foot Guard regiment. During the defence of the colours, Grenadier Captain Percy won the Victoria Cross. To commemorate the battle, one of the Grenadier Guards companies carries the honour ‘Inkerman Company’ as does a company at the Royal Military Academy, Sandhurst. This pack contains five command figures, cast in metal. Sculpted by Mike Percy. Studio miniatures painted by Jamie Getliffe. Models supplied unassembled and unpainted |
| The failure of the British army from a wargaming perspective is not in its men, but in its leaders. The generals, with a couple of notable exceptions, were not experienced in warfare and beyond issuing initial orders usually played little part in the battle. Failure to issue orders or to effectively communicate them to the divisional or brigade commanders often left brigades paralysed whilst they awaited instructions. Additionally, a genuine loathing of one another, and some generals’ preference for elevating officers for their social standing, rather than command capability, exacerbated such problems. This pack contains three of the most famous personalities in command of British forces during the Crimean War, cast in metal: Lord Raglan Lord Campbell Captain Nolan Rules for their use in Black Powder can be found in the Into the Valley of Death supplement. Sculpted by Mike Percy. Studio miniatures painted by Jamie Getliffe. Models supplied unassembled and unpainted |
| At the Battle of Balaklava, the British Heavy Brigade was commanded by General Sir James York Scarlett, and composed of two squadrons each of the 1st Dragoons (The Royals), the 2nd Dragoons (Scots Greys), the 4th Dragoon Guards (Royal Irish), the forth Dragoon Guards (Princess Charlotte of Wales's) and the 6th Dragoons (Inniskilling). The Heavy Brigade's charge against a much larger Russian cavalry force, already in retreat, was enough to put it in disorder and rout it, saving the British supply base from potential disaster. This pack contains three mounted figures, cast in metal. Sculpted by Mike Percy. Studio miniatures painted by Jamie Getliffe. Models supplied unassembled and unpainted |
| At the Battle of Balaklava, the British Heavy Brigade was commanded by General Sir James York Scarlett, and composed of two squadrons each of the 1st Dragoons (The Royals), the 2nd Dragoons (Scots Greys), the 4th Dragoon Guards (Royal Irish), the forth Dragoon Guards (Princess Charlotte of Wales's) and the 6th Dragoons (Inniskilling). The Heavy Brigade's charge against a much larger Russian cavalry force, already in retreat, was enough to put it in disorder and rout it, saving the British supply base from potential disaster. This pack contains three mounted command figures, cast in metal. Sculpted by Mike Percy. Studio miniatures painted by Jamie Getliffe. Models supplied unassembled and unpainted |
| At the Battle of Balaklava, the 13th Light Dragoons were at the forefront of the ill-fated Charge of the Light Brigade. Having weathered the storm through the valley, the regiment ploughing through the Russian artillery, and smashed straight into the cavalry beyond, but had insufficient forces to consolidate its position and was forced to withdraw, once again under fire of the Russian guns. In the fiasco, the regiment lost over 40 men, including three officers. The regiment would later go on to play a minor role at the Battle of Inkerman in November of the same year, and the Siege of Sevastopol. This pack contains three mounted figures, cast in metal. Sculpted by Mike Percy. Studio miniatures painted by Jamie Getliffe. Models supplied unassembled and unpainted |
| At the Battle of Balaklava, the 13th Light Dragoons were at the forefront of the ill-fated Charge of the Light Brigade. Having weathered the storm through the valley, the regiment ploughing through the Russian artillery, and smashed straight into the cavalry beyond, but had insufficient forces to consolidate its position and was forced to withdraw, once again under fire of the Russian guns. In the fiasco, the regiment lost over 40 men, including three officers. The regiment would later go on to play a minor role at the Battle of Inkerman in November of the same year, and the Siege of Sevastopol. This pack contains three mounted command figures, cast in metal. Sculpted by Mike Percy. Studio miniatures painted by Jamie Getliffe. Models supplied unassembled and unpainted |
| When the Crimean War broke out in 1853 the Rifle Brigade sent two battalions. They fought at the Battle of the Alma, where one of their number led the advance across the river. The regiment also saw action at the Battle of Inkerman, and during the Siege of Sevastopol Victoria Crosses were awarded to members of the regiment over the course of the Crimean campaign. During the campaign, the Rifle Brigade began to wear the softer forage cap in place of the more traditional shako. This pack contains four command figures, cast in metal. Sculpted by Mike Percy. Studio miniatures painted by Jamie Getliffe. Models supplied unassembled and unpainted |
| When the Crimean War broke out in 1853 the Rifle Brigade sent two battalions. They fought at the Battle of the Alma, where one of their number led the advance across the river. The regiment also saw action at the Battle of Inkerman, and during the Siege of Sevastopol Victoria Crosses were awarded to members of the regiment over the course of the Crimean campaign. During the campaign, the Rifle Brigade began to wear the softer forage cap in place of the more traditional shako. This pack contains eight figures, cast in metal. Sculpted by Mike Percy. Studio miniatures painted by Jamie Getliffe. Models supplied unassembled and unpainted |
| The Scots Greys, a Dragoon regiment named for their famous grey horses, arrived in the Crimea in 1854, commanded by Lieutenant-Colonel Henry Griffith arrived and assigned to Brigadier-General Sir James Scarlett's Heavy Brigade. On 25 October 1854, as part of the Battle of Balaklava, they repelled a numerically superior Russian Cavalry force of approximately 3,000 sabres (alongside the British dragoons under the same command), inflicting 270 casualties against their 78, routing a direct threat to the Highlanders and the British supply base. However, they could only look on as the Light Brigade were led by Lord Cardigan in that great folly. This pack contains three mounted figures, cast in metal. Sculpted by Mike Percy. Studio miniatures painted by Jamie Getliffe. Models supplied unassembled and unpainted |
| The Scots Greys, a Dragoon regiment named for their famous grey horses, arrived in the Crimea in 1854, commanded by Lieutenant-Colonel Henry Griffith arrived and assigned to Brigadier-General Sir James Scarlett's Heavy Brigade. On 25 October 1854, as part of the Battle of Balaklava, they repelled a numerically superior Russian Cavalry force of approximately 3,000 sabres (alongside the British dragoons under the same command), inflicting 270 casualties against their 78, routing a direct threat to the Highlanders and the British supply base. However, they could only look on as the Light Brigade were led by Lord Cardigan in that great folly. This pack contains three mounted command figures, cast in metal. Sculpted by Mike Percy. Studio miniatures painted by Jamie Getliffe. Models supplied unassembled and unpainted |
| The artillery was the premier arm of the Russian military. The artillery was seen to be, in many ways, the battle winner and large numbers of guns were deployed to every battle in the Crimean theatre. Massed artillery fire had been a central tenet of Russian military doctrine since Napoleonic times with the cannon expected to make up for the lack of infantry firepower. In theory, the cannon should soften up the enemy before the infantry charge them and drive them from the field. However, during the Crimean War, the rifled muskets used by the allies often outranged the Russian cannon. Russian Artillery has a somewhat conspicuous place in history, with the eight guns of No. 3 Don Cossack Battery being the key objective in the ill-fated Charge of the Light Brigade. This model can be used to represent one such gun, a 6-pdr. This pack contains one Cossack Artillery piece with four crew, cast in metal. Sculpted by Mike Percy. Studio miniatures painted by Andrés Amián. Models supplied unassembled and unpainted |
| The cavalry division that served in the Crimea was quite small, with neither the French nor British able to deploy large numbers of cavalry due to the difficulty with transport and the availability of horses in theatre. The initial cavalry brigade did, however four regiments of the Chasseurs d’Afrique, consisting of eight squadrons each. This cavalry went on to take part in the Battle of Balaklava. This pack contains three mounted figures, cast in metal. Sculpted by Mike Percy. Studio miniatures painted by Jamie Getliffe. Models supplied unassembled and unpainted |
| The cavalry division that served in the Crimea was quite small, with neither the French nor British able to deploy large numbers of cavalry due to the difficulty with transport and the availability of horses in theatre. The initial cavalry brigade did, however four regiments of the Chasseurs d’Afrique, consisting of eight squadrons each. This cavalry went on to take part in the Battle of Balaklava. This pack contains three mounted command figures, cast in metal. Sculpted by Mike Percy. Studio miniatures painted by Jamie Getliffe. Models supplied unassembled and unpainted |
| Russian officers usually came from the nobility and either trained at one of the various military cadet schools or acted as a volunteer officer in a regiment before being confirmed in post. A few officers were promoted from the ranks, having served for a number of years as NCOs, but this was not commonplace. Initiative was not encouraged amongst the officer class, who were given little training beyond the parade ground drill anyway. Officers obeyed orders, but when those orders had been carried out, they usually stopped and waited for further orders rather than seizing the initiative or having the confidence to act on their own. Pack contains three mounted Russian Generals and Officers, cast in metal. Sculpted by Mike Percy. Studio miniatures painted by Andrés Amián. Models supplied unassembled and unpainted |
| The Russian cavalry force was the largest in Europe, totalling over sixty regiments organised into twenty cavalry divisions. The light cavalry consisted of hussars and lancers or uhlans. Much as with the infantry, the cavalry training consisted of wheels and manoeuvres designed for the parade ground with little tactical application. Russian hussars wore shakos with a black top, peak and with a brass front plate, but the main body of the headgear was coloured differently for each regiment. Similarly, all wore a pelisse that was trimmed with fur, but the colour of each varied between regiments. For the majority of the campaign Russian hussars wore a grey oilskin cover to protect their shako and a grey greatcoat over their bright uniforms. This pack contains three mounted figures, cast in metal. Sculpted by Mike Percy. Studio miniatures painted by Andrés Amián. Models supplied unassembled and unpainted |
| The Russian cavalry force was the largest in Europe, totalling over sixty regiments organised into twenty cavalry divisions. The light cavalry consisted of hussars and lancers or uhlans. Much as with the infantry, the cavalry training consisted of wheels and manoeuvres designed for the parade ground with little tactical application. Russian hussars wore shakos with a black top, peak and with a brass front plate, but the main body of the headgear was coloured differently for each regiment. Similarly, all wore a pelisse that was trimmed with fur, but the colour of each varied between regiments. For the majority of the campaign Russian hussars wore a grey oilskin cover to protect their shako and a grey greatcoat over their bright uniforms. This pack contains three mounted command figures, cast in metal. Sculpted by Mike Percy. Studio miniatures painted by Andrés Amián. Models supplied unassembled and unpainted |
| Critical Role Unpainted Miniatures are primed, ready to paint miniatures from the fantastic Critical Role universe. Key Features: – Features characters, monsters, and scenery from the Critical Role universe – Little to no assembly required – Primed and ready to paint – Some miniatures include translucent parts |
| Dungeons & Dragons Nolzura's Marvelous Miniatures come with highly detailed figures, primed and ready to paint out of the box. These fantastic miniatures include deep cuts for easier painting. The packaging displays these miniatures in a clear and visible format, so customers know exactly what they are getting. Key Features: Features characters, monsters, and scenery from the Dungeons & Dragons universe Little to no assembly required Primed and ready to paint Some miniatures include translucent parts Packaging may vary from image |
| Critical Role Unpainted Miniatures are primed, ready to paint miniatures from the fantastic Critical Role universe. Key Features: – Features characters, monsters, and scenery from the Critical Role universe – Little to no assembly required – Primed and ready to paint – Some miniatures include translucent parts |
| Critical Role Unpainted Miniatures are primed, ready to paint miniatures from the fantastic Critical Role universe. Key Features: – Features characters, monsters, and scenery from the Critical Role universe – Little to no assembly required – Primed and ready to paint – Some miniatures include translucent parts |
| Each pack contains 2 frames of Cross & Rail fencing plus 1 frame of Stone Bases to enable the construction of a 46cm length of fencing. The pack also contains 92 individual stones for customisation. |
| Cruel Seas IJN Fleet Between the wars Japan reassessed its position with its navy, building the world’s first purpose-built aircraft carrier, the Hosho in 1921 and inventing its deadly fast and powerful type 93 24’’ oxygen fuelled torpedoes. They also decided that as their industrial might could not match that of the west, then they would have to have sharp, training tactics and a crew of superior quality to their foe, and for a while, achieved just this. Their battleships and cruisers were of excellent quality and their growing fleet or aircraft carriers would, after Pearl Harbor, give them the edge in the opening phase of the Pacific War. Excellent training, use of the Long Lance torpedoes and aggressive use of nighttime fast attacks with their destroyers also gave the allies a bloody nose before they learned to counter these attacks. Imperial Japanese Navy Fleet Cruel Seas focuses on the cat and mouse hunts that happened nightly in the Philippines, Guadalcanal and the Solomon’s. They could be IJN sub chasers stalking a crippled US submarine, or mine layers playing their trade at night. Most commonly it will be Japanese barge convoys defending themselves in shallow water against rapacious PT boats. Turning the tables, a late war game could be played out with American landing ships and the terrifying Shin’yo Kamikaze craft. The IJN, therefore, is an interesting mixture of the very sophisticated and the very amateur, boldness being a connecting factor whether in battleships or tiny craft. It is a do or die force, get in close and things will go well, dither or maintain the range of the allied technology and firepower will overreach you. The Imperial Japanese Navy Fleet Contains: 6 x T-14-class MTBs (metal) 3 x Maru-Ni kamikaze boats (metal) 3 x Shin-Yo kamikaze boats (metal) 4 x large Sampan (resin and metal - two of each canopied boat) 1 x Escort Type Hei minesweeper (resin & metal) 1 x Aichi D3A 'Val' (metal) Ship Cards Plastic Torpedo markers |
| One Resin and Metal Cruel Seas Marinefahprahm F-lighter |
| Description In Cruel Seas, you take on the role of a naval crew manning their fragile coastal craft as they head out day and night to take on both the sea and the enemy. Command your flotilla of small ships as they head out to attack a convoy, drop off Commandoes for a behind-the-lines mission or task them with one of the other myriads of missions this small and versatile craft would perform. Be it the Coastal waters of England or across the Channel to France, on to the Mediterranean waters or on further to the vast Island chains of the Pacific, Cruel seas will ensure your small ships see plenty of adrenaline-fuelled action! FREE Special Miniature (while stocks last) As with many of our Bolt Action range of books if you order direct from our webstore you will receive a fantastically crafted model and Cruel Seas is no exception! Warlord sculptor Marco has produced this iconic piece, the conning tower of a German U-Boat breaking the surface... Cruel Seas, the rules Within the pages of Cruel Seas you'll find the complete rules for small ship action plus full-colour guides, superb art courtesy of Osprey Publishing, history on your fleets, Campaign rules and special weaponry, Aircraft rules and more! |
| A most peculiar type of riverine and estuary craft was also developed by the Russians. This was the 1124 and 1125 class of armoured rivercraft or Bronekater. These shallow draught craft, drawing only 2-foot of water, could penetrate river systems and lakes, even being moved by rail and lorry to new locations. Some featured numerous armoured turrets, even T-34 tank turrets, and again, frequently equipped themselves with rails for the Katyusha launchers. They were tough little boats capable of receiving and dishing out punishment, though they had a small crew and were slow and poor deep watercraft. |
| The D-3 class was built in wood, and carrying torpedoes openly on deck could attain speeds of 32 knots(59 km/h, 37 mph). Later boats in the series had improved engines increasing operating speeds to 48 knots (89 km/h, 55 mph)!
Although not many D-3s served in the Black Sea they were quite active, sinking German Barges and an Italian midget submarine. A most notable action was the sinking of the Elbing-class large torpedo boat T-31 in the Battle of Nerva Island. |
| Submarine chasers were used for destroying German U-boats that were stationed off the coast of the United States (some 67 German U-boats were sunk). In the Pacific Theatre, submarine chasers were used for amphibious landings, courier and escort duty.
SC-497-class submarine chasers were a class of 438 submarine chasers, 98 tons with a length of 110 ft 10 in (34 m) and a speed of 18 knots. 142 were part of the Lend-Lease program with 78 sent to the Soviet Union, 50 to France and 3 to Norway. The three Norwegian examples served with distinction on the Shetland bus service, running agents, refugees and weapons past the German blockade between occupied Norway and Britain. Contains: 2x resin & metal US Coastal Cutter Subchaser Ship card Wake marker |
