The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 

Special offers

Products Map

Products Map

  • Model Air - Blue Grey RAL7016

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL115
    £2.95
     
  • Model Air - Camouflage Brown RAL8020

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL117
    £2.95
     
  • Model Air - Camouflage Grey Green RAL7008

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL116
    £2.95
     
  • Model Air - Camouflage Grey RAL7027

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL118
    £2.95
     
  • Model Air - Desert Tan 686

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL122
    £2.95
     
  • Model Air - Grey Violet

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL128
    £2.95
     
  • Model Air - IDF Green

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL126
    £2.95
     
  • Model Air - Intermediate Blue

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL299
    £2.95
     
  • Model Air - NATO Black

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL251
    £2.95
     
  • Model Air - NATO Brown

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL249
    £2.95
     
  • Model Air - USAF Brown

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL125
    £2.95
     
  • Model Air - USAF Dark Grey

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL123
    £2.95
     
  • Model Air - USAF Green

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL124
    £2.95
     
  • Model Air - USAF Light Grey

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL121
    £2.95
     
  • Model Air - USAF Medium Grey

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL120
    £2.95
     
  • Model Air - USN Sea Blue

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL295
    £2.95
     
  • Model Air - White Grey RAL9002

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL119
    £2.95
     
  • Modern Australian Infantry (AUS04)

    Modern Australian Infantry. This Empress Miniatures Blister Pack contains 4 metal model miniatures with 4 separate heads.

    • HK417 x 1
    • F88 x 1
    • F88/GL x 1
    • 7.62 Minimi x 1
    AUS04
    £6.00
    £8.00 save 25%
  • Modern Australian Infantry (AUS05)

    Modern Australian Infantry. This Empress Miniatures Blister Pack contains 4 metal model miniatures with 4 separate heads.

    • HK417 x 1
    • F88 x 1
    • F88/GL x 1
    • 7.62 Minimi x 1
    AUS05
    £6.00
    £8.00 save 25%
  • Modern Chinese PLA Infantry (PLA02)

    Modern Australian Infantry. This Empress Miniatures Blister Pack contains 4 metal model miniatures with 4 separate heads.

    • HK417 x 1
    • F88 x 1
    • F88/GL x 1
    • 7.62 Minimi x 1
    PLA02
    £6.00
    £8.00 save 25%
  • Modern Chinese PLA Infantry (PLA03)

    Modern Chinese PLA Infantry. This Empress Miniatures Blister Pack contains 4 metal model miniatures with 4 separate heads.

    • QBZ-03
    • QBZ-95
    • QBZ-95 UGL
    PLA03
    £6.00
    £8.00 save 25%
  • Modern Chinese PLA Infantry (PLA04)

    Modern Chinese PLA Infantry. This Empress Miniatures Blister Pack contains 4 metal model miniatures with 4 separate heads.

    • QBB-95
    • QBU-88
    • PF-98
    PLA04
    £6.00
    £8.00 save 25%
  • Modern Chinese PLA Infantry (PLA05)

    Modern Chinese PLA Infantry. This Empress Miniatures Blister Pack contains 4 metal model miniatures with 4 separate heads.

    • PLA Command Unit
    PLA05
    £6.00
    £8.00 save 25%
  • Modern Chinese PLA Infantry (PLA06)

    Modern Chinese PLA Infantry. This Empress Miniatures Blister Pack contains 3 metal model miniatures with 3 separate heads.

    • HJ8 Anti-Tank Rocket Launcher
    PLA06
    £6.00
    £8.00 save 25%
  • Modern Chinese PLA Infantry (PLA07)

    Modern Chinese PLA Infantry. This Empress Miniatures Blister Pack contains 3 metal model miniatures with 3 separate heads. Also includes 1 Type 89 Mortar.

    PLA07
    £6.00
    £8.00 save 25%
  • Modern Chinese PLA Infantry (PLA08)

    Modern Chinese PLA Special Forces Infantry. This Empress Miniatures Blister Pack contains 4 metal model miniatures with 4 separate heads.

    PLA08
    £6.00
    £8.00 save 25%
  • Moldy Ochre

    Moldy Ochre - Formulated for the ultimate hobby experience

    Developed and used by the leading professionals in the hobby miniatures industry, Formula P3 paints, brushes, and hobby tools bring your miniatures to life.

    Privateer Press spent years designing the Formula P3 paint line. Here are a few reasons why it is the best miniature paint on the market.

    Great Colors:
    The key colors for WARMACHINE and HORDES come in base and highlight shades to make their application intuitive.

    Workable Drying Time:
    With an extended drying time, you can blend and mix paints without fear of wasting your paint or employing retardants or flow extenders.

    Wear Resistant:
    The formula dries to a hard and satin finish resistant to chipping. You won't fear handling your finished miniatures.

    Liquid Pigment:
    Unlike other paints, Formula P3 uses liquid pigments. It never separates when thinned and retains brightness after thinning and drying.

    Superior Coverage:
    Formula P3 often covers in a single coat - even over a black undercoat.
    PIP 93063
    £2.75
    £3.75 save 27%
  • Monks of High River Ten Thunders Malifaux

    This Malifaux box set contains Monks of High River Ten Thunders Malifaux 3 plastic miniatures.

    WYR20712
    £11.25
    £15.00 save 25%
  • Moody Mauve

    Speedpaint is truly a one-coat painting solution. Simply apply one rich coat of Speedpaint directly over a primed miniature and you are done! The Speedpaint will leave that part of the model with both intense shading, vibrant colour, and a highlight effect in one application.
     
    It flows perfectly over your miniatures and creates an unparalleled painting solution to help you get more time for gaming.
    WP2032
    £3.50
     
  • Moon Shinobi Gremlins Malifaux

    Moon Shinobi Gremlins Malifaux Box Set, contains three 32mm 'heroic' scale miniature made of high quality plastic. Will require some preparation and assembly. 

     

    WYR20616
    £11.25
    £15.00 save 25%
  • Moon Yellow Vallejo Game Air (17ml)

    Introduction

    Game Air is a range of water-based, matte acrylic colors, developed especially for airbrushing. The very latest formulation of this range uses new resins that have been selected for qualities which up till now could not be achieved in water based colors. The strength, resistance and covering power of Game Air is superior to any acrylic airbrush colour currently available.  Game Air is also ideal for application by brush to highlight the smallest detail on a miniature. The pigments have been selected according to their degree of light fastness and optimum micronisation. The effects of washes and transparencies can be obtained by diluting the colors and all the colours and varnishes can be mixed together and diluted with airbrush thinner.

    Game Air Colours

    The colours in the Game Air range have been selected to appeal to modelers and wargamers who use the existing Game Color range, so are ideal for all fantasy modelling. The names and shades of the most popular colors of Game Color have been retained in Game Air, but using the finer formulation and resins employed for Model Air (see Equivalency Table). In the color chart we include a diagram of the most frequent colour combinations: base color, light and shadow.

    Surfaces

    Game Air has exceptional performance on all materials. The adhesion of the colours on resin, plastic, steel and white metal is extraordinary. Moreover the surfaces do not require previous priming. Only in the case of a very dark base may it be useful to first apply a primer in order to increase the brightness of the final colors.

    How to Use

    Shake well before using. Pour the paint directly into the airbrush, either undiluted or previously diluted with Thinner (71.261). Colors can be mixed in the cup of the airbrush. Game Air dries almost instantly on the model and permits immediate application of aging processes as well as the use of washes, pigments, and dry-brush techniques.

    VAL72705
    £2.95
     
  • Moonlake Coral

    Speedpaint is truly a one-coat painting solution. Simply apply one rich coat of Speedpaint directly over a primed miniature and you are done! The Speedpaint will leave that part of the model with both intense shading, vibrant colour, and a highlight effect in one application.
     
    It flows perfectly over your miniatures and creates an unparalleled painting solution to help you get more time for gaming.
    WP2034
    £3.50
     
  • Mordor Orcs

    Orcs are the foulest creatures to walk Middle-earth. They are evil-hearted monsters that rejoice in slaughter and destruction. The Orc's natural aggression makes them the perfect tool of evil intent, their numberless hordes forming the core of the Mordor army. While they're individually cowardly, they gain strength through numbers - a mass of Orc warriors can be a terrifying sight for any enemy of the Dark Lord. 
     
    This plastic boxed set contains 34 components, with which to build 24 Mordor Orcs: 8 with hand weapon and shield, 8 with spear and shield, 4 with two-handed weapon, and 4 with bow. This set comes with 24 25mm round bases. These miniatures are supplied unpainted and require assembly - we recommend using Citadel Plastic Glue and Citadel Paints.
    30-33
    £28.35
    £31.50 save 10%
  • Morgan Distraught Father

    The Walking Dead All Out War Morgan Distraught Father Booster
     
    Number of Miniatures: 3
     
    Product Type: Booster Set
     
    Well over a year after they first met, Rick returned to Cynthiana and discovered an emaciated and distraught Morgan, who greeted him with a shovel. A glimmer of recognition sparked in Morgan’s wild eyes, and he joined his old friend on the road to Washington DC.
     
    CONTENTS
    This booster pack contains 3 unique, collectible miniatures allowing you to add Morgan and Eugene to your games, along with an extra Walker to bulk out your horde.
     
    Contents:
     
    Plastic Morgan and Eugene Cooney Miniatures
    Plastic Walker Duane Miniature
    Morgan, Distraught Father, Eugene Cooney, and Tyreese, Blinded by Rage Character Cards
    Body Armour, Grenade, Shovel, and Titanium Baseball Bat Equipment Cards
    Mantic Points
    MGWD121
    £13.50
    £18.00 save 25%
  • Mortarion Daemon Primarch of Nurgle

    Mortarion Daemon Primarch of Nurgle is a multi-part plastic kit contains the components necessary to assemble one towering model – the word ‘miniature’ barely does it justice, as he looms over the rest of the Death Guard and gives even Bloodthirsters something to look up to!

    He is clad in baroque power armour known as the Barbaran Plate – this is covered in rust and rot, with skulls, spikes and Nurgle symbolism on each of the chunky components. Mouldering robes, chains and a rotten cowl hang from this armour, partially covering the system of pipes that feed his breathing apparatus – it is safe to assume that this ventilator isn’t delivering fresh and clean air to Mortarion, rather vile spores and disease.

    He is armed with 2 foul weapons: a massive scythe named Silence, a rusting yet razor-sharp blade featuring brutal chain-teeth, stained with the blood of worlds and capable even of hacking a Reaver Titan to pieces; and The Lantern, an ancient energy pistol. There are two modelling options for these weapons – one option features the weapons down by Mortarion’s side, the other features a much more aggressive pose.

    Mortarion features huge, decaying wings – these are modelled with pockmarks, holes and tears, representing the horror and decay of Nurgle’s hordes. Speaking of Nurgle’s hordes, there are plenty of extras with this kit – 2 Nurgling Drones carrying phosphex bombs hang from the chains on Mortarion’s armour, with a further 3 on the base: 1 carries a Chaos icon, one waves a censer and one carries a tank of unmentionably horrid substances.

    The base itself is detailed with rocks which themselves are being corrupted by the foul presence of the Daemon Primarch. Mortarion, Daemon Primarch of Nurgle comes as 78 components, and is supplied with a Citadel 100mm Round base.

    43-49
    £92.25
    £102.50 save 10%
  • Moss and Lichen Vallejo Weathering

    Moss and Lichen Vallejo Weathering 40ml reproduces weathered grey green colors and textures of lichen on stones and walls. Apply with a brush, or dabbed on with a sponge to reproduce the mottled aspect of the fungus.

    VAL73827
    £5.50
     
  • Mud and Grass Effects Vallejo Weathering

    Mud and Grass Effects Vallejo Weathering 40ml contains crushed vegetation and reproduces the texture of grass and mud on dioramas, as well as compacted on the tracks of tanks and the wheels of armored vehicles.
    VAL73826
    £5.50
     
  • Mug o’ Brush – Paint Brush Stand

    The “Mug o Brush” paint brush stand from The Colour Forge is a great addition to any work bench. Designed to save space and protect your brushes from damage.

    This kit is made of 3mm MDF which is quick and simple to assemble without compromising on quality. The stand when assembled will fit inside a typical mug to prevent any chance of knocking it over.

    This kit requires assembly.

    *mug and brushes not included

    TCF-ACC-002
    £13.95
     
  • Mummified Grime

    Speedpaint is truly a one-coat painting solution. Simply apply one rich coat of Speedpaint directly over a primed miniature and you are done! The Speedpaint will leave that part of the model with both intense shading, vibrant colour, and a highlight effect in one application.
     
    It flows perfectly over your miniatures and creates an unparalleled painting solution to help you get more time for gaming.
    WP2078
    £3.50
     
  • Murder Scene

    Speedpaint is truly a one-coat painting solution. Simply apply one rich coat of Speedpaint directly over a primed miniature and you are done! The Speedpaint will leave that part of the model with both intense shading, vibrant colour, and a highlight effect in one application.
     
    It flows perfectly over your miniatures and creates an unparalleled painting solution to help you get more time for gaming.
    WP2057
    £3.50
     
  • Myrmidesh Painbringers

    The Myrmidesh are an elite warrior-cult who exemplify the pride of the Dark Prince. Each of their blade-sects considers their own favoured technique to be supreme, and on the rare occasions they are proven wrong, their spiteful rage is terrible to behold.
     
    Add a unit of graceful and deadly infantry to your Hedonites of Slaanesh army. Clad in the finest armour and wielding wicked blades, they dance their way into battle, slicing through enemy formations. One of the models may be assembled as a Painmaster, making it even easier for you to bring the pain. 
     
    This 86-part plastic kit makes five Mymidesh Painbringers for use in Warhammer Age of Sigmar. It comes supplied with five 32mm Round Citadel bases. The kit can alternately be built as Symbaresh Twinsouls.
    83-90
    £36.00
    £40.00 save 10%
  • Mysterious Waters Markers

    Mysterious Waters Markers are designed for use with medieval and fantasy miniature battles and role-playing games.

    Mighty rivers and placid lakes cover the lands of your favourite fantasy worlds. Most of these waterways and ponds are normal bodies of water, but that is not always true. Constant battle and powerful magics have polluted the waters of frequent battlefields to the point where the rivers and ponds overflow with unearthly powers. Now you can mark these wicked waters cautioning all who enter of the dangerous nature of these obstacles.

    Use these markers with our Rivers, Ponds & Swamps terrain sets in our Battlefield in a Box collection to increase your terrain options!

    These oversized markers are done in the unparalleled Gale Force Nine style with bold full-colour graphics. Each marker is laser cut from durable clear acrylic plastic and backed with felt to protect your gaming surface and miniatures.

    Highlight the hazards of your battlefield with Gale Force Nine’s Gaming Aids. Our accessories and markers are laser cut from colourful, durable plastic. Each piece is pre-assembled and ready to deploy to the tabletop right out of the package. Game ON!

    Mysterious Waters Markers (GFG321) contain:

    2 – Bloody Waters
    2 – Boiling Springs
    2 – Calm Waters
    2 – Magic Waters
    2 – Necrotic Ooze
    2 – Rapids Ahead!
    GFG321
    £3.75
    £7.50 save 50%
  • Mysterious Woods Markers

    Mysterious Woods Markers are designed for use with medieval and fantasy miniature battles and role-playing games.

    Vast forests cover the lands of your favorite fantasy worlds. Most of these woods are simple serene groves of ordinary trees, but that is not always true. Constant battle and powerful magics have warped the woods of frequent battlefields to the point where the forests are now supernatural sites of dire peril. Now you can mark these bewitched woodlands cautioning all who enter of the dangerous nature of these obstacles.

    Use these markers with our Woods terrain sets in our Battlefield in a Box collection to increase your terrain options!

    These oversized markers are done in the unparalleled Gale Force Nine style with bold full-color graphics. Each marker is laser cut from durable clear acrylic plastic and backed with felt to protect your gaming surface and miniatures.

    Highlight the hazards of your battlefield with Gale Force Nine’s Gaming Aids. Our accessories and markers are laser cut from colorful, durable plastic. Each piece is pre-assembled and ready to deploy to the tabletop right out of the package. Game ON!

    Mysterious Woods Markers (GFG320) contain:

    2 – Abyssal Forest
    2 – Bloody Forest
    2 – Fungal Wood
    2 – Tranquil Woods
    2 – Venom Woods
    2 – Wyrdwood
    GFG320
    £3.75
    £7.50 save 50%
  • Mythic America Aztec & Nations Starter Set

    The new Mythic Americas version of Warlords of Erehwon still keeps at its heart a singular objective in mind – to allow for fast-paced and exciting miniature battles upon a standard-sized table between rival forces known as Warbands. A Warband represents your own band of warriors – courageous humans, blood-thirsty monsters, legendary heroes, and mythological entities from the depths of the darkest myths.
     
    Mythic Americas: Warlords of Erehwon provides a new multi-level, scenario-driven approach to your games. This approach offers plenty of opportunities to reward tactical play, but at the same time keeps things manageable in terms of the size of forces and space required. The game still uses ten-sided and Order dice, making for a game with mechanical depth and considerable adaptability. The Order dice test system, at the mechanical core of Mythic Americas, and an extremely balanced rules set offers Warband leaders great tactical freedom, but the game still offers lots of opportunity for fate and chance to have a say in the outcome of your battles. But, every experienced general throughout the ages knows that fate and chance will test even the most ingenious battle plan!
     
    This is The Way.
     
    The Mythic Americas Starter Set includes:
     
    Aztec Starter warband:
    1 Tlalocan High Priest Hero unit (INCLUDING 4 Bound-Dead Bodyguards. 5 models)
    2 Tlalocan-Bound Dead WARRIOR units (10 models)
     
    Tribal Nations Starter warband:
    1 Sachem Warlord Unit (INCLUDING 2 Mohawk Warrior Bodyguards - 3 models)
    1 Mohawk Warrior UNITS (5 models)
    1 Seneca Warrior UNITS (5 models)
     
    Dice
    Softback Rulebook
    Game Cards
    Tokens
     
    Models supplied unassembled and unpainted
    721510002
    £75.00
     
  • Mythril Blade

    The TWO THIN COATS paint range features primary and secondary colours, as well as flesh tones, natural tones, metallic’s, and washes. All of the paints are designed around a triad system that consists of a shadow, a mid-tone, and a highlight, yet all can be used individually to create whatever result you desire.
     
    TWO THIN COATS paints will stand out due to their flow, how well they can be thinned (of course), the depth of their colour, and their most unique feature, how smooth they are when applying and particularly how smooth the finish is on the end result.
     
    15ml paint in dropper bottle with paint agitator (mixing ball). 
    10042
    £3.16
    £3.95 save 20%