The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 

Special offers

Vallejo

Vallejo

Products


  • AK Interactive Pipettes Small

    AK Interactive: Pipettes small size 12 units (approx. 1 ml)

    AK614
    £3.50
     
  • Alien Purple Vallejo Game Air (17ml)

    Introduction

    Game Air is a range of water-based, matte acrylic colors, developed especially for airbrushing. The very latest formulation of this range uses new resins that have been selected for qualities which up till now could not be achieved in water based colors. The strength, resistance and covering power of Game Air is superior to any acrylic airbrush colour currently available.  Game Air is also ideal for application by brush to highlight the smallest detail on a miniature. The pigments have been selected according to their degree of light fastness and optimum micronisation. The effects of washes and transparencies can be obtained by diluting the colors and all the colours and varnishes can be mixed together and diluted with airbrush thinner.

    Game Air Colours

    The colours in the Game Air range have been selected to appeal to modelers and wargamers who use the existing Game Color range, so are ideal for all fantasy modelling. The names and shades of the most popular colors of Game Color have been retained in Game Air, but using the finer formulation and resins employed for Model Air (see Equivalency Table). In the color chart we include a diagram of the most frequent colour combinations: base color, light and shadow.

    Surfaces

    Game Air has exceptional performance on all materials. The adhesion of the colours on resin, plastic, steel and white metal is extraordinary. Moreover the surfaces do not require previous priming. Only in the case of a very dark base may it be useful to first apply a primer in order to increase the brightness of the final colors.

    How to Use

    Shake well before using. Pour the paint directly into the airbrush, either undiluted or previously diluted with Thinner (71.261). Colors can be mixed in the cup of the airbrush. Game Air dries almost instantly on the model and permits immediate application of aging processes as well as the use of washes, pigments, and dry-brush techniques.

    VAL72776
    £2.75
     
  • Angel Giraldez Painting Masterclass Volume 2

    Angel Giraldez Painting Masterclass Volume 2 is a 152 page softback continuing from masterclass volume 1.

    Includes:

    • Essential Techniques
      • Airbrushing
      • Weathering
      • Non Metallic Metals
    • Tips
      • Volume
      • Highlights
      • Coating
    • Colour Theory

    Preorder before November 14th and get an exclusive “Imperial Agent Crane Rank" miniature that will never be on sale.

    VAL750031
    £38.00
    £40.00 save 5%

    OUT OF STOCK

  • AV Vallejo - Brush Restorer 85ml

    AV Vallejo - Brush Restorer 85ml

    Softens and restores all fine sable brushes used for watercolors, miniatures, silk painting, etc. Does not contain alcohol.

    VAL28890
    £3.99
     
  • AV Vallejo Model Air - Airbrush Cleaner 200ml

    Airbrush Cleaner is an indispensable product for cleaning the airbrush. It not only eliminates residual paint, but at the same time lubricates the interior of the airbrush without damaging the mechanism.

    VAL199
    £7.99
     
  • AV Vallejo Model Air - Aluminium (Metallic)

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL062
    £2.75
     
  • AV Vallejo Model Air - Artic Blue (Metallic)

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL071
    £2.75
     
  • AV Vallejo Model Air - Barley Grey

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL051
    £2.75
     
  • AV Vallejo Model Air - Black

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL057
    £2.75
     
  • AV Vallejo Model Air - Black (Metallic)

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL073
    £2.75
     

    OUT OF STOCK

  • AV Vallejo Model Air - Black Green

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL021
    £2.75
     
  • AV Vallejo Model Air - Black Grey

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL055
    £2.75
     
  • AV Vallejo Model Air - Blue

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL004
    £2.75
     
  • AV Vallejo Model Air - Blue (RLM 78)

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL101
    £2.75
     
  • AV Vallejo Model Air - Blue Angel Blue

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL090
    £2.75
     
  • AV Vallejo Model Air - Bright Brass (Metallic)

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL067
    £2.75
     
  • AV Vallejo Model Air - Brown (RLM 26)

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL105
    £2.75
     
  • AV Vallejo Model Air - Burnt Umber

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL040
    £2.75
     
  • AV Vallejo Model Air - Camouflage Black Brown

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL042
    £2.75
     
  • AV Vallejo Model Air - Camouflage Black Green

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL018
    £2.75
     
  • AV Vallejo Model Air - Camouflage Dark Green

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL019
    £2.75
     
  • AV Vallejo Model Air - Camouflage Green

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL022
    £2.75
     
  • AV Vallejo Model Air - Camouflage Light Brown

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL035
    £2.75
     
  • AV Vallejo Model Air - Camouflage Light Green

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL006
    £2.75
     
  • AV Vallejo Model Air - Camouflage Medium Brown

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL038
    £2.75
     
  • AV Vallejo Model Air - Chrome (Metallic)

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL064
    £2.75
     
  • AV Vallejo Model Air - Copper (Metallic)

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL068
    £2.75
     
  • AV Vallejo Model Air - Dark Earth

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL029
    £2.75
     
  • AV Vallejo Model Air - Dark Green

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL012
    £2.75
     
  • AV Vallejo Model Air - Dark Grey Blue

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL054
    £2.75
     
  • AV Vallejo Model Air - Dark Sea Blue

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL087
    £2.75
     
  • AV Vallejo Model Air - Dark Sea Grey

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL048
    £2.75
     
  • AV Vallejo Model Air - Dark Seagreen

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL053
    £2.75
     
  • AV Vallejo Model Air - Dark Yellow

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL025
    £2.75
     
  • AV Vallejo Model Air - Duck Egg Green

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL009
    £2.75
     
  • AV Vallejo Model Air - Field Green

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL093
    £2.75
     
  • AV Vallejo Model Air - Fire Red

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL084
    £2.75
     
  • AV Vallejo Model Air - Flat Tan

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL079
    £2.75
     
  • AV Vallejo Model Air - Fluorescent Red

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL082
    £2.75
     
  • AV Vallejo Model Air - French Blue

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL088
    £2.75
     
  • AV Vallejo Model Air - German Green

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL020
    £2.75
     
  • AV Vallejo Model Air - German Grey

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL052
    £2.75
     
  • AV Vallejo Model Air - Gold (Metallic)

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL066
    £2.75
     
  • AV Vallejo Model Air - Gold Yellow

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL078
    £2.75
     
  • AV Vallejo Model Air - Golden Brown

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL032
    £2.75
     
  • AV Vallejo Model Air - Gray Blue

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL005
    £2.75
     
  • AV Vallejo Model Air - Green (RLM 62)

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL104
    £2.75
     
  • AV Vallejo Model Air - Green Brown

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL030
    £2.75
     
  • AV Vallejo Model Air - Green Zinc Chromate

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL094
    £2.75
     
  • AV Vallejo Model Air - Grey (RLM 84)

    Matt acrylic colors, water-based and especially formulated for airbrushing. The Model Air color range contains the most complete selection of the military colors used in recent history, including the colors of WWI, WWII and up to the present. Each color is based on extensive research by our experts of the existing and previous military references so as to offer the modeler the highest possible historical accuracy.
     
    Model Air is used directly or diluted with Vallejo Airbrush Thinner or Flow Improver. It is recommended to first prime the surface, and then apply Model Air in several layers. The colors dry very rapidly and form a homogenous paint film of extraordinary resistance while preserving even the smallest detail of the model. For airbrushing these colors, the compressor air pressure is recommended at 15 – 20 PSI or 0.5 to 1 kg. Model Air can of course also be applied with a brush. For correct airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.
    Model Air is not flammable, and does not contain solvents
    VAL103
    £2.75