The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 

Printable version

Airbrush

WarGameStore has partnered with Harder & Steenbeck and Sparmax to bring you a range of compressors and airbrushes for wargame modellers.

Products


  • 1/8" Harder & Steenbeck Airbrush Quick Release Body

    This Harder & Steenbeck connector is screwed into the end of your air hose and by simply sliding the spring loaded sleeve back, the airbrush is disconnected. This item is self sealing when disconnected, preventing the need to remove air pressure from the hose before changing airbrushes. Please note that you will also need a suitable tail to connect your airbrush to the quick release body. Fits all 1/8bsp female hose connections (9mm diameter)

    104403
    £10.50
     
  • 1/8"BSP Female to Badger & Revell Adaptor

    1/8"BSP Female to Badger & Revell Adaptor is used to connect a Badger or Revell hose M5 connection (5mm diameter) to a 1/8"BSP male outlet (9mm diameter)
    It can also be used to connect an airbrush with 1/8bsp male outlet to a Badger hose.
    104683
    £3.50
     
  • Harder & Steenbeck Modular Airbrush Holder (Holds 2 Airbrushes)

    This Harder & Steenbeck airbrush holder is slim, elegant and incredibly stable.

    Designer shaped airbrush holder, the basic version version holds two airbrushes but can be expanded indefinitely with the Harder & Steenbeck Extension For Airbrush Holder

    110193
    £29.75
     
  • Harder & Steenbeck Extension For Modular Airbrush Holder

    Extension module for Harder & Steenbeck Airbrush Holder - HS-110193

    Can be added to the Airbrush Holder to increase the holding capacity by one.

    The Airbrush Holder can be expanded indefinitely.

    110203
    £12.00
     
  • Harder & Steenbeck 5ml Chrome Metal Cup for CRplus Airbrushes

    Harder & Steenbeck 5ml Chrome Metal Cup.

    Will also fit the following Harder & Steenbeck Gravity Feed Airbrushes. Compatible with

    • Evolution
    • Evolution Silverline
    • Evolution AL & CRplus
    • Infinity
    • Infinity CRplus
    • Colani
    123334
    £10.50
     
  • Harder & Steenbeck 5ml Chrome Metal Lid for CRplus Airbrushes

    Harder & Steenbeck 5ml Chrome Metal Lid.

    Will also fit the following Harder & Steenbeck Gravity Feed Airbrushes. Compatible with

    • Evolution
    • Evolution Silverline
    • Evolution AL & CRplus
    • Infinity
    • Infinity CRplus
    • Colani
    123464
    £7.00
     
  • Nozzle 0.2mm for Ultra, Evolution & Infinity Airbrush

    Harder & Steenbeck Replacement 0.2mm Nozzle for Ultra, Evolution & Infinity Airbrush

    123822
    £14.00
     
  • Complete Hose, 2.5m Quick Coupling nd 2.7mm - G 1/4" Female Thread

    Complete Hose, 2.5m Quick Coupling nd 2.7mm - G 1/4" Female Thread
    123883
    £24.99
     
  • Harder & Steenbeck Airbrush Clear Hose Quick Release

    Harder & Steenbeck Airbrush Clear Hose 1/8bsp with Quick Release Coupling is 2.5 metres long. This hose has a 1/8bsp female adaptor and will connect to any Harder & Steenbeck airbrush or any Airbrush fitted with a Quick Release Tail.
    123973
    £19.00
     
  • Harder & Steenbeck Clear Hose Air Flow Control

    Harder & Steenbeck Airbrush Clear Hose 1/8bsp has a 2.5m Hose and is fitted with a Quick Release Coupling with Air Flow Control

    This hose has a 1/8bsp female adaptor and will connect to any Harder & Steenbeck airbrush or any Airbrush fitted with a Quick Release Tail.

    The quick release coupling body has an air flow control allows you to regulate the air pressure from 0-100%
    123983
    £26.00
     
  • Evolution CRplus Airbrush Harder and Steenbeck 0.2mm

    Evolution CRplus Airbrush Harder and Steenbeck 0.2mm – The Chrome Edition

    The Evolution CRplus combines elegance with maximum robustness; it has a high-quality triple coating with a chrome finish. As well as its stylish appeal, the chrome plating minimises allergy risks for anyone who has ever had problems with nickel equipment. The Evolution CRplus is moreover fully solvent-resistant, and fitted with PTFE seals to the nozzle, cup joint and valve.

    Thjis Harder and Steenbeck Airbrush Includes:

    • 0.2mm Nozzle & Needle
    • 2 ml Gravity Feed Cup
    • 2 ml Cup Lid
    • PTFE seals
    • Quick Release Tail
    • Presentation Case
    126214
    £125.00
     
  • Infinity CRplus Airbrush Harder and Steenbeck 0.2mm

    Infinity CRplus Airbrush Harder and Steenbeck 0.2mm. Stylish Chrome Design The infinity CRplus features a triple coating of copper, nickel and high-gloss exterior chrome plating. It presents itself not only in high-quality optics, but it is suitable in particular for nickel allergy sufferers as well as those users who have problems with oxidation (tarnishing) of nickel alloys because of hand perspiration. An innovative long life needle seal and PTFE seals to the cup screwing and valve are responsible for safe protection against unwanted air and colour output - also in the application of solvent-based paints

    Features:

    • Triple Coated Chrome Finish
    • 0.2mm Nozzle & Needle
    • 2 ml Gravity Cup
    • 2 ml Cup Lid
    • PTFE seals
    • Quick Fix End Piece & Paint Flow Dial
    • Quick Release Tail
    • Presentation Case
    126564
    £165.00
     
  • Harder & Steenbeck Airbrush Holder

    This Harder & Steenbeck airbrush holder is slim, elegant and incredibly stable. The stand has three supporting legs, ensuring that the airbrush is held firmly in place. It's pyramid-like shape makes it particularly space-saving on desktops. Its heavy chrome plated for long lasting service.

    For use with all Harder & Steenbeck Evolution, Infinity, Grafo & Ultra suction, gravity and side feed airbrushes.

    126953
    £15.75
     
  • Harder & Steenbeck Service Kit

    Harder & Steenbeck Service Kit for INFINITY, EVOLUTION, GRAFO and ULTRA models, all the tools you need for the successful maintenance of your Harder & Steenbeck airbrushes.

    The sevice kit is housed in a leather carry case and includes a microfibre cloth, a nozzle cleaning needle/reamer, a backward flushing nozzle cap, four cleaning brushes and a screwdriver for the removal of the packing gland, plus four nozzle and needle seals each. Suitable for all Infinity, Evolution, Grafo and Ultra airbrushes.

    The Harder & Steenbeck Airbrush Service Kit includes:

    • Microfibre Cloth - Wipe down your airbrush body and needle
    • Nozzle Cleaning Needle/Reamer - Suitable for nozzle sizes from 0.2mm to 0.6mm 
    • Plastic Nozzle Cap - For backward flush cleaning
    • Four Cleaning Brushes - To clean the tiniest openings and crevices of your airbrush
    • Screwdriver - For removing the packing gland/packing screw
    • Three PTFE Replacement Nozzle Washers
    • Three Replacement Needle Seals
    217500
    £34.99
     
  • 30ml Plastic Bottle With Dosing Spout & Shaking Stone

    30ml clear solvent resistant plastic bottle with dosing spout and shaking stone.

    Ideal for storing and transferring paint to your airbrush.

    The shaking stone allows easy mixing of paint pigments when settled and the dosing spout ensures air tight storage.

    266081
    £3.00
     
  • 125ml Plastic Bottle With Dosing Spout & Shaking Stone

    125ml clear solvent resistant plastic bottle with dosing spout and shaking stone.

    Ideal for storing and transferring paint to your airbrush.

    The shaking stone allows easy mixing of paint pigments when settled and the dosing spout ensures air tight storage.

    266082
    £4.75
     
  • Nozzle 0.35mm Sparmax SP-35

    Replacement nozzle fits Sparmax airbrush models - GP-35, SP-35, SP-35b, SP-35c & SP-35f
    884070
    £10.50
     
  • Zest it Acrylic Airbrush Cleaner 250ml

    The Airbrush Cleaner, for use with Acrylic and water based media, is for spraying through the Airbrush when a colour change is necessary whilst working.

    Place a few drops (1 ml) of the Airbrush Cleaner into the paint cup of the Airbrush and spray into a cleaning pot. Spray through until clear, pour out remaining liquid from cup or wipe with kitchen towel and add water. Spray through until clear. Wipe the cup with kitchen towel and add new colour to cup, test spray on scrap paper.

    If you leave the airbrush for a short time between colour changes when cleaning, without flushing with water, you may find the original colour comes out of the brush when you start again. This is because the cleaner keeps working and has cleaned more residue out of the brush! Flush with water and change colour.

    250ML container

    TZABC2501
    £7.99